Panasonic R410A service manual Outdoor unit maintenance remote control

5. Outdoor unit maintenance remote control

5-4. Monitoring Operations: Display of Indoor Unit and Outdoor Unit Sensor Temperatures

<Operating procedure>

(1)Press and hold the button and button simultaneously for 4 seconds or longer to switch to temperature monitor mode.

During temperature monitoring, “Service Monitor” is lit.

(The display and operations are the same as when monitor mode is started from the unit remote controller.)

(2) Press the button and select the indoor unit to monitor. (4)

(3)Use the temperature setting and buttons to select the item code of the temperature to monitor.

The selected indoor unit No. and the temperature data are displayed.

(4)To end monitoring, press the button. The display returns to the normal display.

	(3)
(1)	(2)

* The display does not blink.

	Item code	Meaning of Code
Indoor unit data	02	Indoor unit intake temp.
	03	Indoor unit heat exchanger temp. (E1)
	04	Indoor unit heat exchanger temp. (E2)
	05	–
	06	Indoor unit discharge temp.
	07	–
	08	–
	09
Outdoor unit data	0A	Discharge temp. (TD)
	0b	–
	0C	–
	0d	Intake temp. (TS)
	0E	Outdoor unit heat exchanger temp. (C1)
	0F	Outdoor unit heat exchanger temp. (C2)
	10	–
	11	Outdoor air temp. (TO)
	12	–
	13	–
	14	Current value
	15	Outdoor MV value
	19	Frequency

* Depending on the model, some items may not be displayed.

5

5-6