Panasonic R410A Specifications, How to Connect Wiring to the Terminal, For stranded wiring, Fig

WARNING Loose wiring may cause the terminal to overheat or result

in unit malfunction. A fire hazard may also exist. Therefore, ensure that all wiring is tightly connected.

When connecting each power wire to the corresponding terminal, follow the instructions on “How to connect wiring to the terminal” and fasten the wire securely with the fixing screw of the terminal plate.

How to Connect Wiring to the Terminal

For stranded wiring

(1)Cut the wire end with a wire cutter or wire-cutting pliers, then strip the insulation to expose the stranded

1wiring about 3/8 in. (Fig. 1-1)

(2)Using a Phillips head screwdriver, remove the terminal screw(s) on the terminal plate.

(3)Using a ring connector fastener or pliers, securely clamp each stripped wire end with a ring pressure terminal. (Fig. 1-1)

(4)Place the ring pressure terminal, and replace and tighten the removed terminal screw using a screwdriver. (Fig. 1-2)

1. Specifications

	Stranded wire
in.	Ring
3/8
	pressure
Strip
	terminal

Fig. 1-1

Special	Screw
washer
	Ring pressure	Screw and
	terminal	Special washer
Wire	Terminal plate

Ring pressure

terminal

Wire

Fig. 1-2

1-62