Panasonic R410A Outdoor unit maintenance remote control, List of Item Codes, Item code, Parameter

					5. Outdoor unit maintenance remote control
	List of Item Codes
	Item code			Parameter
	01	Control system schedule	Do not set
	02	Control system schedule	Do not set
	03	Control system schedule	Do not set
	04	Snowfall sensor operation	0 = No sensor, control performed
			1	= No sensor, control not performed
			2	= Sensor present, control performed
			3	= Sensor present, control not performed
	05	Outdoor fan quiet mode	Do not set
	06	Defrost fan speed selection	Do not set
	07	Ignore capacity	0	= Disabled	1 = Ignores capacity ratio
	08	Control system schedule	Do not set
	09	Control system schedule	Do not set
	0A	Control system schedule	Do not set
	0b	Control system schedule	Do not set
	0C	Forced operation of	0	= Disabled
		indoor unit drain pump	1	= During cooling only, 2 hours stopped + 20 minutes operating
			(regardless of whether the unit is running or stopped)
			2	= During cooling only, 4 hours stopped + 20 minutes operating
			(regardless of whether the unit is running or stopped)
			3	= At all times, 4 hours stopped + 20 minutes operating
			4	= At all times, 2 hours stopped + 20 minutes operating
	0d	Odor countermeasure when	Do not set
		indoor cooling thermostat is OFF
	0E	Cool only	0	= Heat pump	1 = Cool only
	0F	Control system schedule	Do not set
	10	Control system schedule	Do not set
	11	Multi-floor installation	Do not set
	12	External Electronic Expansion Valve Kit	0 = No		1 = Yes
	13	Control system schedule	Do not set
	4E	Test mode 1	Do not set
	4F	Test mode 2	Do not set
	50	Demand 1	40%, 45% ... 100% ... 160%
	51	Demand 2	40%, 45% ... 100% ... 160%
	52	Current control level	40%, 45% ... 100% ... 160%, –1 (normal: at shipment from factory)
	53	Control system schedule	Do not set
	54	Control system schedule	Do not set
	55	Control system schedule	Do not set
	56	Control system schedule	Do not set
5	57	Control system schedule	Do not set
	58	Control system schedule	Do not set
	59	Control system schedule	Do not set
	5A	Control system schedule	Do not set
	5B	Control system schedule	Do not set
			* Figures in parentheses indicate the data at the time of shipment from the factory.

5-8