Paradyne manual Comsphere 3000 Series Carrier

COMSPHERE 3000 Series Carrier

2.To install the speaker to the cabinet's front mounting rails, first determine if you want to mount the speaker panel above or below the carrier. Then, fasten one of the speaker panel

mounting brackets to a front mounting rail with a

#10 Phillips-head screw (supplied). See Figure 3-13.

NOTE

If your cabinet has unthreaded rails, first attach a speed nut to the rail hole you intend to use. Then, fasten a bracket to the mounting rail using a supplied #12 screw (the longer Phillips-head screw).

3.Verify that this is the position in which you want to mount the panel by holding the panel against the bracket and aligning the panel's captive screws with the bracket's screw post. (For appearance, you can adjust the bracket's position to eliminate space between the speaker panel and carrier.)

If necessary, loosen the bracket and make any necessary adjustments.

4.Fasten the second speaker panel bracket to the other mounting rail to match the first bracket's position.

Figure 3-13. Models 3811/3911 Speaker Panel Installation Directly to Cabinet Rails

3-20 December 1994 3000-A2-GA31-80