Paradyne 9123 manual Health and Status Messages 1 What It Indicates

Operation and Maintenance

Health and Status Messages

The following table provides Health and Status messages that apply to the FrameSaver 9123 unit.

Table 5-7. Health and Status Messages (1 of 3)

Message

What It Indicates

AIS at Network 1	An Alarm Indication Signal (AIS) is received by the
	network interface. AIS is an unframed, all ones
	signal. Possible reasons include:
	H Upstream FrameSaver unit is transmitting AIS
	(keep-alive signal).
	H The network is transmitting an AIS.
Auto-Configuration Active	Auto-Configuration feature is active, which allows
	automatic configuration and cross-connection of
	DLCIs as they are reported by the network LMI.
Back-to-Back Mode Active	The operating mode has been configured for
	back-to-back operation ( Main Menu → Control →
	Change Operating Mode).
	The FrameSaver unit can be connected to another
	FrameSaver unit without a frame relay switch
	between them.
	This feature is useful for product demonstrations
	or for a point-to-point configuration using a leased
	line.
CTS down to Port-1 Device	The user data port CTS control lead on the
	FrameSaver unit is off.
DLCI nnnn Down,	The DLCI for the specified frame relay link is down.
frame relay link 1, 2
DTR Down from Port-1 Device	The DTR control lead from the device connected to
	the user data port is deasserted.
EER at Network 1	The error rate of the received network signal
	exceeds the currently configured threshold. This
	condition only occurs if the network interface is
	configured for ESF framing.
	This condition clears when the error rate falls
	below the threshold value, which may take up to
	15 minutes.

1nnnn indicates a DLCI number of 16 through 1007.

2frame relay link is one of the following:

±Net1-FR1. The frame relay link specified for the network interface, Network 1.

±Port-1. The frame relay link associated with the user data port.

5-14 July 2000 9123-A2-GB20-10