Paradyne 9123 manual Network LMI-Reported DLCIs Status Field What It Indicates

Operation and Maintenance

DLCIs without an asterisk have not been configured in the unit. These DLCIs pass through the unit transparently, without being monitored and with no demultiplexing/multiplexing of management diagnostics or user data being performed. Only DLCIs on the Net1-FR1 and Port-1 frame relay links appear on this screen; nonconfigured DLCIs on other links are discarded.

Table 5-9. Network LMI-Reported DLCIs Status

Field	Status	What It Indicates
DLCI	16 through 1007	Identifies the Local Management
		Interface-reported DLCI numbers
		assigned to the selected interface ± the
		identifying number assigned to the path
		between two frame relay FrameSaver
		units' ports.
		DLCI statuses are listed in ascending
		order (i.e., lowest number first).
Status		LMI-reported status of the DLCI:
	Active	H Whether the DLCI is active (capable
		of carrying data) in the frame relay
		network,
	Inactive	H Whether it is inactive in the frame
		relay network,
	Deleted 1
		H Whether it has been deleted by the
		frame relay network, or
	New 1
		H Whether it has been created by the
		frame relay network.
CIR (bps)	0±1536000	Displays the committed information rate
		reported by the Stratacom switch. CIR
		information only appears in this column
		when LMI Protocol is set to Standard.
		If blank, the switch does not support this
		feature.

1Appears for 10 seconds only, before the network changes Deleted to Inactive and New to Active.

9123-A2-GB20-10 July 2000 5-19