Paradyne 9123 manual Field Select or Enter, Paradyne

Setting Up NetScout Manager Plus for FrameSaver Devices

4.Click on the ... button to the right of indicated fields for a drop-down list from which selections can be made. Minimally, configure the following fields:

Field		Select or Enter . . .
Domain		User Defined
DLCI		DLCI number for trap being assigned
Stats Type		PARADYNE
Trap Variable		Trap variable to be configured
Key1		The ifIndex for the frame relay logical interface is 1
Key2		DLCI number (same as DLCI above)
Type		Absolute or Delta radio button 1
		Rising, Falling, or Both radio button 2
Threshold		Value that will trigger a trap.
1	Latency MIB variables should be Absolute; all others should be Delta.
2	Generally, Rising is selected.

5.Select the OK button (at the bottom of the screen) to add this alarm.

6.Repeat Steps 3 through 5 until all traps are configured for all DLCIs.

Refer to Configuring Alarms in the NetScout Manager/Plus & NetScout Server Administrator Guide for additional information.

9123-A2-GB20-10 July 2000 8-9