Paradyne 9123 manual Snmp Traps Options 3, Link Traps Possible Settings Disable, Up, Down, Both

Configuration

Table 3-14. SNMP Traps Options (3 of 3)

Link Traps

Possible Settings: Disable, Up, Down, Both

Default Setting: Both

Determines whether SNMP linkDown or linkUp traps are sent to the currently configured trap manager(s). A linkDown trap indicates that the unit recognizes a failure in one of the interfaces. A linkUp trap indicates that the unit recognizes that one of its interfaces is active.

Use the Link Traps Interface and the DLCI Traps on Interface configuration options to specify which interface will monitor linkUp and linkDown traps messages.

Disable ± Does not send linkDown or linkUp trap messages.

Up ± Sends trap messages for linkUp events only.

Down ± Sends trap messages for linkDown events only.

Both ± Sends trap messages for linkUp and linkDown events.

Link Traps Interfaces

Possible Settings: Network, T1s, Ports, All

Default Setting: All

Specifies which interfaces will generate linkUp, linkDown, and enterpriseSpecific trap messages. These traps are not supported on the COM port.

Network ± Generates these trap messages on the network interface only.

T1s ± For applicable T1 FrameSaver units, generates these trap messages for linkUp, linkDown, and enterpriseSpecific events on both the T1 network and DSX-1 interfaces.

Ports ± Generates these trap messages for linkUp, linkDown, and enterpriseSpecific events on the user data port only.

All ± Generates these trap messages for linkUp and enterpriseSpecific events on all interfaces, except for the COM port, that are applicable to the FrameSaver model.

DLCI Traps on Interfaces

Possible Settings: Network, Ports, All, None

Default Setting: All

Specifies which interfaces will generate linkUp and linkDown trap messages for individual DLCIs. These traps are only supported on the frame relay interfaces.

Network ± Generates these trap messages on DLCIs for the network interface only.

Ports ± Generates these trap messages for DLCIs on a user data port only.

All ± Generates these trap messages on all frame relay interfaces.

None ± No DLCI trap messages are generated.

RMON Traps

Possible Settings: Enable, Disable

Default Setting: Enable

Specifies whether remote monitoring traps are sent to the currently configured trap manager(s). RMON traps are typically sent as a result of the Alarms and Events Groups of RMON1 when a selected variable's configured threshold is exceeded.

Display Conditions ± This option only appears for units with the FLEX SLV feature set.

Enable ± Sends RMON trap messages when set thresholds are exceeded.

Disable ± Does not send RMON trap messages.

3-56 July 2000 9123-A2-GB20-10