Paradyne 9123 manual Ethernet Performance Statistics

Operation and Maintenance

Ethernet Performance Statistics

The following statistics appear when Ethernet is selected from the Performance Statistics menu.

Main Menu → Status → Performance Statistics → Ethernet

Statistic	What It Indicates
Port Rate (Mbps)	The operating rate as detected on the Ethernet port. One of
	the following may appear for this statistic:
	H Disconnected ± The line is not connected.
	H 10 Mbps or 100 Mbps ± The Ethernet port is operating at
	this rate.
	H Disabled ± The Ethernet port has been disabled.
Duplex	The duplex mode detected on the Ethernet port. One of the
	following may appear for this statistic:
	H Disconnected ± The line is not connected.
	H Full ± The Ethernet port is operating in full duplex mode
	(4-wire).
	H Half ± The Ethernet port is operating in half duplex mode
	(2-wire).
	H Disabled ± The Ethernet port has been disabled.
Frames Transmitted	The number of successfully transmitted frames on the port.
Frames Received	The number of frames received on the port.
Errored Frames	The number of errors detected on the port. Possible errors
	include:
	H Internal transmit and receive errors
	H Transmitter and receiver overruns
	H Receive checksum errors
	H Alignment errors
	H Long frames
Excessive Collisions	The number of failed frame transmissions due to excessive
	collisions.
Carrier Sense Errors	The number of times the carrier sense condition was lost, or
	was never asserted, during frame transmissions.
Deferred	The number of delayed first transmissions due to the line being
Transmissions	busy.

5-38 July 2000 9123-A2-GB20-10