Paradyne 9123 manual Adding SLV Alarms Manually

Setting Up NetScout Manager Plus for FrameSaver Devices

Adding SLV Alarms Manually

For FrameSaver units with the SLV and SLM Reporting feature set, once DLCIs have been discovered, SLV alarms should be defined and assigned to each DLCI.

When configuring alarms manually, every alarm must be configured for each DLCI; that is, if there are eight alarms and 20 DLCIs, 160 trap configurations must be created (8 x 20). For this reason, it is recommended that the OpenLane defaults be used. Follow the procedure below to configure alarms manually.

To load OpenLane default settings for alarms, see Adding SLV Alarms Using a Template.

"Procedure

1.From the NetScout Manager Plus main window, with the FrameRelay and Admin radio buttons still selected, click on the Config Manager icon to open the Configuration Manager main window.

2.Select the Custom radio button from the Properties File area (in the upper right of the window), then Property... (down the center of the screen).

The Custom Property Editor window opens (see the window in Editing Alarms).

3.Select a DLCI from the Trap list, and select the Add... button (to the right of the list). The Add Trap window opens.

8-8 July 2000 9123-A2-GB20-10