Paradyne 9123 manual Physical Tests Screen Example

Troubleshooting

Physical Tests

A FrameSaver 9123 unit's physical tests screen for the network interface is shown below.

Main Menu → Test → [Network Physical Tests/Data Port Physical Tests]

This example shows the Network Physical Tests screen, for the model with 64 PVCs and the FLEX SLV upgrade.

Physical Tests Screen Example

main/test/network				9123-C-SLV
Device Name: Node A				3/26/2000 23:32
		NETWORK 1 PHYSICAL TESTS
Test		Command	Status	Results
Local Loopbacks
Line Loopback:		Start	Inactive	0:00:00
Payload Loopback:		Start	Inactive	0:00:00
Repeater Loopback:		Start	Inactive	0:00:00
Remote Loopbacks
Send Line Loopback: Down		Send	Inactive	0:00:00
Pattern Tests
Send:	user-defined 0a0a	Stop	Active	0:00:00 - Errors 99999+
Monitor: user-defined 0a0a		Stop	Active	0:00:00 - Errors 99999+

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit InjectErr ResetMon

The ResetMon function key at the bottom of the screen only appears when a Monitor 511 test pattern is Active. Select ResetMon to reset the monitor pattern error counter.

CAUTION:

You should not run these tests with frame relay equipment attached; you must disconnect the frame relay equipment and use external test equipment.

6-20 July 2000 9123-A2-GB20-10