Paradyne 9123 manual Assigning Time Slots/Cross Connections

Configuration

Assigning Time Slots/Cross Connections

The Time Slot Assignment/Cross Connect feature provides an easy method

of assigning time slots for frame relay data and creating cross-connections to the synchronous data interface. The system allows you to assign DS0s on the T1 network interface and between the user data port and network interface in order to share the T1 network.

Based upon the setting of Service Type on the Easy Install screen, the following cross-connection assignments can be made:

HService Type set to Frame Relay ± Frame relay links to the network interface time slots.

HService Type set to Leased Line ± Synchronous data port to the network interface time slots.

You can also clear cross-connection assignments for the unit, or for a selected interface.

NOTE:

Although it is not required, it is suggested that you progress through each screen in order, from top to bottom.

Use the following procedures to assign cross connections.

Assigning Frame Relay Time Slots to the Network Interface

Before assigning network time slots for use by frame relay traffic, configure the network physical and frame relay options (if needed), then allow Time Slot Discovery to autodetect and assign the appropriate time slots to frame relay.

If Time Slot Discovery is not currently active, you can manually assign time slots on the network interface for frame relay traffic using the Frame Relay Network Assignments screen. This screen is read-only when Time Slot Discovery is set to Enable for the network interface.

If Service Type is set to Frame Relay, which is the default, the Frame Relay

Network 1 Assignment screen appears.

Main Menu → Easy Install → Time Slot Assignment Screen

9123-A2-GB20-10 July 2000 3-29