Auto-Configuration, Easy Install | Paradyne 9123 specs

Menu Hierarchy

	MAIN MENU
	Status
	Test
Auto-Configuration	Configuration
Auto-Configuration	Auto-Configuration
• Frame Relay Discovery Mode	Control
• Automatic Circuit Removal	Easy Install
	Easy Install		MAIN MENU
			MAIN MENU
			Status
			Test
			Configuration
		Control	Auto-Configuration
		Control	Control
		System Information	Easy Install
		Administer Logins
		Change Operating Mode
		Select Software Release
		LMI Packet Capture Utility
		Disconnect Modem
		Reset Device

System Information	Administer Logins		Select Software Release	LMI Packet Capture Utility
• Device Name	• Login ID		• Current Release	• Capture Interface
• System Name,	• Password		• Alternate Release	• Packet Capture Start/Stop
Location, Contact	• Access Level		• Switch & Reset	• Status
• Date				• Packets in Buffer
• Date				• Packets in Buffer
• Time	New			• Display LMI Trace Log
	New

	Login Entry			LMI Trace Log
	Login Entry

MAIN MENU

Status

Test

Configuration

Auto-Configuration

Control

Easy Install			Easy Install

•Service Type

•Node IP Address and Subnet Mask

•TS Access

•Create Dedicated Network Management Link

•Ethernet Port Options Screen

•Time Slot Assignment Screen

•Selected Network Physical Interface Options

00-16700b

9123-A2-GB20-10

July 2000

A-3

Image 223

Paradyne 9123 manual Auto-Configuration, Easy Install

Contents

FrameSaver Flex Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Security and Logins Troubleshooting Setting Up NetScout Manager Plus for FrameSaver Devices Index Purpose and Intended Audience About This GuideDocument Organization Devices. Describes setup of the NetScout Manager Plus Setting Up OpenLane for FrameSaver Devices. IdentifiesWhere installation and setup information is located and how Setting Up NetScout Manager Plus for FrameSaver Product-Related Documents Highlighted text When viewing this manual online. Click onConventions Used To indicate a hyperlink to additional information System Overview About the FrameSaver FlexSystem Overview FrameSaver Flex Feature Sets Flex Flex SLV Feature Feature Set Basic Advanced Basic Flex Features Through Connections PVCs Dedicated Management PVCs 9123-A1-211 9123-A1-213 Feature 9123-A1-221 9123-A1-223Maximum Number of PVCs and Management PVCs Supported Models July Advanced Flex SLV Features OpenLane SLM System NetScout Manager Plus and NetScout Probes About the FrameSaver Flex User Interface Basic Operation Logging On Procedure If your login was Then Select Main MenuMain Menu Screen Work Areas Service Level Verification System OptionsScreen Format Description Keyboard Keys Navigating the ScreensPress Select For the screen Press Enter to Function Function Keys Selecting from a Menu Switching Between Screen Areas Entering Information Selecting a FieldExample User Interface and Basic Operation Configuration Configuration Configuration Menu Basic ConfigurationConfiguration EDIT/DISPLAY Configuration Option Area Description Configuration Option Areas Main Menu → Configuration Accessing and Displaying Configuration Options Configuration → PVC Connections Changing Configuration Options Saving Configuration Options Main Menu → Easy Install Using the Easy Install FeatureEasy Install Screen Example Default If the selection is Unit is configured to operate Main Menu → Control → System Information Setting Up So the Router Can Receive RIPEntering System Information Setting the System Clock Configuration → Data Ports → Dlci Records AUTO-CONFIGURATION Setting Up Auto-ConfigurationMain Menu → Auto-Configuration Auto-Configuration Screen Example Main Menu → Auto-Configuration → Frame Relay Discovery Mode Selecting a Frame Relay Discovery ModeDiscovery Mode Configuration Description 9123-A2-GB20-10 July Automatically Removing a Circuit Changing Operating Mode Setting Up Back-to-Back OperationMain Menu → Control → Change Operating Mode Configuring the Overall System Configuration Option Tables LMI Behavior Configuring Frame Relay and LMI for the SystemMain Menu → Configuration → System → Frame Relay and LMI System Frame Relay and LMI Options 1 System Frame Relay and LMI Options 2 LMI Status Enquiry N1 Possible Settings 1, 2, 3, 4Traffic Policing System Frame Relay and LMI Options 3 LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 Service Level Verification Options 1 Configuring Service Level Verification Options SLV Timeout Clearing Event Threshold Service Level Verification Options 2SLV Packet Size bytes Main Menu → Configuration → System→ General Configuring General System OptionsGeneral System Options Network Physical Interface Options 1 Configuring the Physical InterfacesConfiguring the Network Interface Main Menu → Configuration → Network → Physical Network Initiated LLB Network Physical Interface Options 2Bit Stuffing Transmit Timing Ansi Performance Report Messages Network Initiated Dclb Possible Settings Disable, V.54&ANSINetwork Physical Interface Options 3 Network Initiated PLB Circuit Identifier Network Physical Interface Options 4 Transmit Clock Source Configuring the User Data PortMain Menu → Configuration → Data Ports → Physical Data Port Physical Interface Options 1 Monitor RTS Control Data Port Physical Interface Options 2Port DTE Initiated Loopbacks Assigning Time Slots/Cross Connections Main Menu → Easy Install → Time Slot Assignment ScreenAssigning Frame Relay Time Slots to the Network Interface Frame Relay Network 1 Assignment Frame Relay Network Time Slot Assignment Screen ExampleValue Meaning Time Slot Assignment Rule Select Frame Relay Network Assignments Synchronous Data Port Assignment Screen Example Assigning the Synchronous Data Port to Network Time SlotsSync Data Port Assignment Clearing Assignments Interface Frame Relay Options 1 Configuring Frame Relay for an Interface LMI Parameters Interface Frame Relay Options 2 Frame Relay DS0s Base Rate Interface Frame Relay Options 3 Dlci Record Options 1 Manually Configuring Dlci RecordsMain Menu→ Configuration→ Network/Data Port→ Dlci Records Dlci Type Possible Settings Standard, Multiplexed Excess Burst Size Bits Dlci Record Options 2CIR bps Committed Burst Size Bc Bits Dlci Priority Dlci Record Options 3Outbound Management Priority Main Menu → Configuration → PVC Connections Configuring PVC ConnectionsPVC Connection Options 1 Destination Edlci PVC Connection Options 2Destination Link Destination Dlci Configuring Node IP Information Setting Up Management and Communication Options Node IP Options 1 Node IP Options 2 TS Access Management Link Node IP Options 3 TS Access 10. Management PVC Options 1 Configuring Management PVCsName 10. Management PVC Options 2 Primary Link Possible Settings Net1-FR1, Port-1, ClearSet DE Primary Dlci 10. Management PVC Options 3Primary Edlci Snmp Management Configuring General Snmp ManagementName 1 Access 11. General Snmp Management Options 1 11. General Snmp Management Options 2 Configuring Telnet and/or FTP Session Support12. Telnet and FTP Session Options 1 12. Telnet and FTP Session Options 2 Inactivity Timeout FTP Session FTP Login Required12. Telnet and FTP Session Options 3 Disconnect Time Minutes NMS IP Validation Configuring Snmp NMS SecurityAccess Type 13. Snmp NMS Security Options Number of Trap Managers Configuring Snmp Traps14. Snmp Traps Options 1 Snmp Traps Enterprise Specific Traps 14. Snmp Traps Options 2 14. Snmp Traps Options 3 Link Traps Possible Settings Disable, Up, Down, BothRmon Traps 15. Ethernet Port Options 1 Configuring the Ethernet PortInterface Status Proxy ARP 15. Ethernet Port Options 2 Character Length Configuring the Communication Port16. Communication Port Options 1 Port Use Ignore Control Leads Login Required16. Communication Port Options 2 Stop Bits 16. Communication Port Options 3 RIP 16. Communication Port Options 4 17. External Modem COM Port Options Configuring the COM Port to Support an External ModemExternal Modem Commands Dial-In Access Configuration Security and Logins Controlling Asynchronous Terminal Access Limiting Access Set the configuration option Controlling Telnet or FTP Access Controlling External COM Port Device Access Limiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Disabling Snmp Access Controlling Snmp Access Assigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Main Menu → Control → Administer Logins Creating a LoginField Enter Deleting a Login Modifying a Login Operation and Maintenance Main Menu → Status → Identity Displaying System InformationView this field To find Main Menu → Status → Display LEDs and Control Leads Viewing LEDs and Control LeadsDisplay LEDs & Control Leads Screen General Status LEDs 1 Label Indication Color What It Means LED Descriptions Network Interface LEDs Label Indication Color What It Means General Status LEDs 2 Label Indication Color What It Means Network Interface Control Lead DescriptionsUser Data Port LED Label Indication Color What It Means Additional Control Leads Label Indication What It Means Device Messages 1 What It Indicates What To Do Device Messages See Changing Software Device Messages 2 What It Indicates What To Do Device Messages 3 What It Indicates What To Do Software Device Messages 4 What It Indicates What To Do Changes? prompt Device Messages 5 What It Indicates What To Do Status Menu Status InformationStatus Self-Test Results Messages Self-Test Results Messages Last System Reset Date and TimeLast System Reset Date and Time System and Test Status Messages Health and Status Messages 1 What It Indicates Health and Status Messages Frame relay link Health and Status Messages 2 What It Indicates Frame relay link 1, 2 Health and Status Messages 3 What It Indicates Test Status Messages 1 What It Indicates Test Status Messages LMI-Reported DLCIs Status Screen Example Network LMI-Reported DLCIs StatusTest Status Messages 2 What It Indicates Main Menu → Status → LMI Reported DLCIs Network LMI-Reported DLCIs Status Field What It Indicates 10. PVC Connection Status 1 Field PVC Connection StatusMain Menu → Status → PVC Connection Status PVC Connection Status Screen Example 10. PVC Connection Status 2 Field What It Indicates Network Timeslot Assignment Status Screen Example Time Slot Assignment StatusDisplaying Network Time Slot Assignments Main Menu → Status → Timeslot Assignment Status → Network Cross Connect Status Field Indicates Bottom 11. IP Routing Table Values 1 Column What It Indicates IP Routing TableMain Menu → Status → IP Routing Table IP Routing Table Screen Example 11. IP Routing Table Values 2 Column What It Indicates Performance Statistics Performance StatisticsMain Menu → Status → Performance Statistics Performance Statistics Menu Performance Statistics → ESF Line Clearing Performance StatisticsPerformance Statistics → Clear All Statistics Performance Statistics → Frame Relay Service Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Main Menu → Status → Performance Statistics → Dlci Dlci Performance Statistics13. Dlci Performance Statistics 1 What It Indicates CIR&EIR 13. Dlci Performance Statistics 2 What It Indicates 14. Frame Relay Performance Statistics 1 What It Indicates Frame Relay ErrorsFrame Relay Performance Statistics Main Menu → Status → Performance Statistics → Frame Relay 14. Frame Relay Performance Statistics 2 What It Indicates Frame Relay Errors contdFrame Relay LMI 14. Frame Relay Performance Statistics 3 What It Indicates Frame Relay Hdlc Errors Main Menu → Status → Performance Statistics → ESF Line ESF Line Performance StatisticsTo select intervals You must enter an interval or time on ±LOFC±± ESF Line Performance Statistics Screen Example UAS Statistic What It Indicates Main Menu → Status → Performance Statistics → Ethernet Ethernet Performance Statistics Trap Event LOG Trap Event LogMain Menu → Status → Trap Event Log Trap Event Log Screen Example FTP File Transfers Dir directory Command Definition If the message displayed is Then Upgrading System Software Changing Software Determining Whether a Download Is Completed If retrieving Then Transferring Collected Data Troubleshooting Indicators See Problem Indicators Resetting the Unit from the Control Menu Resetting the Unit and Restoring CommunicationResetting the Unit By Cycling the Power If selecting Following occurs Restoring Communication with a Misconfigured Unit LMI Packet Capture Utility Feature Troubleshooting Management Link FeatureMain Menu → Control → LMI Packet Capture Utility LMI Trace Log Example LMI Packet Capture Utility → Display LMI Trace LogLMI Trace LOG Alarm Conditions 1 What It Indicates What To Do Alarms Operational appears Alarm Conditions 2 What It Indicates What To Do Alarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Viewing the Trap Event Log Troubleshooting TablesDevice Problems Device Problems 1 Symptom Possible Cause Solutions With a Misconfigured Unit Device Problems 2 Symptom Possible Cause Solutions Frame Relay PVC Problems Symptom Possible Cause Solutions Frame Relay PVC Problems Test Menu Example Tests AvailableTest When the status of a test is Only command available is Test Timeout FeatureStarting and Stopping a Test Aborting All Tests PVC Tests Screen Example PVC TestsNetwork PVC Tests Main Menu → Test → Data Port PVC Tests PVC LoopbackSend Pattern Main Menu → Test → Network PVC Tests Connectivity Monitor Pattern Physical Tests Screen Example Physical Tests Main Menu → Test → Network Physical Tests Line Loopback Payload Loopback Repeater Loopback Send Line Loopback Data Channel Loopbacks on a Frame Relay Link Qrss Send and Monitor Pattern Tests Main Menu → Test → Data Port Physical Tests DTE Loopback Main Menu → Test → IP Ping IP Ping Test Procedure Main Menu → Test → Lamp Test Lamp Test OpenLane Support of FrameSaver Devices OpenLane Support of FrameSaver Devices Setting Up the OpenLane SLM System Setting Up FrameSaver Flex and SLV Support To Find Your License Key Number Ordering Flex SLV Activations Activation Certificate Administering and Managing Flex SLV Activations Checking Activation Certificate Status Entering an Activation Certificate Scheduling Activations Accessing and Printing the Certificate Summary Report Cancelling Scheduled ActivationsChecking the Status of Scheduled Activations July Setting Up NetScout Manager Plus for FrameSaver Devices User history AlarmsPreparation Properties Configuring NetScout Manager Plus Procedure Adding SLV Alarms Using a Template Editing Alarms 9123-A2-GB20-10 July Adding SLV Alarms Manually Paradyne Field Select or Enter Creating History Files Procedure Dvuhist -f Dallas51 3 config 30 60 Dallas51k.udh Installing the User-Defined History Files Monitoring a DLCIs History Data July 9123-A2-GB20-10 July Monitoring the Agent Using NetScout Manager Plus Procedure Setting Up NetScout Manager Plus for FrameSaver Devices Setting Up Network Health for FrameSaver Devices Installation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports Generating Reports for a Group About Service Level ReportsAbout At-a-Glance Reports About Trend Reports Reports Applicable to Flex and SLV DevicesPrinted Reports July 9123-A2-GB20-10 July Setting Up Network Health for FrameSaver Devices Menus Menu Hierarchy Status Menu Hierarchy Frame Relay Mode Easy Install Auto-Configuration Data Ports Assignment Menu Hierarchy Leased Line Mode Control Menu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults Downloading MIBs and Snmp Traps MIB Support FrameSaver Units sysDescr system System Group mib-2FrameSaver Units sysObjectID system Frame Relay Logical Layer Interfaces Group mib-2Paradyne Indexes to the Interface Table ifTable Physical Layer Rmon Logical Layer NetScout Indexes to the Interface Table ifTableFor the DTE Examples Standards Compliance for Snmp Traps Variable-Binding Trap authenticationFailureTrap warmStart Table B-3. warmStart Trap What It Indicates Possible Cause Traps linkUp and linkDown MIB Physical Sublayer Logical Link Sublayer Physical Sublayer contd DevHealthAndStatus Traps enterprise-Specific SLVs devFrExt.mib Placeholder Traps RMON-Specific Rising Event Operation Rmon Alarm and Event DefaultsEvent Defaults EventIndex EventDescription EventType EventCommunity Physical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Dlci Alarm Defaults ± Paradyne Area Dlci Alarm Defaults ± NetScout Area Rx Dlci Link Object ID Cross-References Numeric Order 6.1.2.1.2.10.32.2.1 6.1.2.1.2.2.16.1.4.1.1795.2.24.2 Dlci CIR 6.1.4.1.1795.2.24.2.6.9.4 6.1.4.1.1795.2.24.2.6.9.4.4.2 Dlci EIR 6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.5.2.1 6.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Rear Panel Connectors, Cables, Pin Assignments Function Circuit Direction Pin Number T1 Network Cable Feature No -F1-500Canadian T1 Line Interface Cable Feature No -F1-510 T1 Network Interface Signal Direction Pin # COM Port Connector Pin Standard EIA-232-D Crossover Cable AT Command String To configure the modem to Direction Pin Socket Data Port ConnectorSignal Standard V.35 Straight-through Cable Ethernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications Data Port COM PortT1 Network Interface Ethernet Port Equipment Description Model / Feature NumberFrameSaver Flex SLV Upgrade Equipment List NMS Products Description Part Number Feature NumberOptional Features Cables Numbers Index IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9 IN-10