Configuring Telnet and/or FTP Session Support | Paradyne 9123

Configuration

Table 3-11. General SNMP Management Options (2 of 2)

Name 2 Access

Possible Settings: Read, Read/Write

Default Setting: Read

Specifies the type of access allowed to the objects in the MIB. This is the type of access allowed for external SNMP managers accessing MIB objects using Community Name 2.

Read ± Allows read-only access (SNMP Get command). This includes all objects specified as either read-only or read/write in the MIB RFCs.

Read/Write ± Allows read and write access (SNMP get and set commands).

Configuring Telnet and/or FTP Session Support

Telnet and FTP options control whether a Telnet or FTP (File Transport Protocol) session is allowed through an interconnected IP network and the access security applicable to the session. Two Telnet sessions can be active at a time

(see Table 3-12).

Main Menu → Configuration → Management and Communication →

Telnet and FTP Session

When a TS Access Management Link has been set up and activated, the following options have no effect upon the PVC:

HTelnet Login Required

HSession Access Level

HFTP Login Required

Table 3-12. Telnet and FTP Session Options (1 of 3)

Telnet Session

Possible Settings: Enable, Disable

Default Setting: Enable

Specifies whether the FrameSaver unit will respond to a session request from a Telnet client on an interconnected IP network.

Enable ± Allows Telnet sessions between the FrameSaver unit and Telnet client.

Disable ± Does not allow Telnet sessions.

Telnet Login Required

Possible Settings: Enable, Disable

Default Setting: Disable

Specifies whether a user ID and password (referred to as the login) are required to access the menu-driven user interface via a Telnet session. If required, the login used is the same login used for an menu-driven user interface session. This option does not affect the TS Access Management Link.

Enable ± Requires a login to access a Telnet session.

Disable ± Does not require a login.

3-50

July 2000

9123-A2-GB20-10

Image 82

Paradyne 9123 manual Configuring Telnet and/or FTP Session Support, General Snmp Management Options 2

Contents

FrameSaver Flex Copyright E 2000 Paradyne Corporation All rights reserved Contents Configuration Security and Logins Troubleshooting Setting Up NetScout Manager Plus for FrameSaver Devices Index Purpose and Intended Audience About This GuideDocument Organization Setting Up NetScout Manager Plus for FrameSaver Setting Up OpenLane for FrameSaver Devices. IdentifiesWhere installation and setup information is located and how Devices. Describes setup of the NetScout Manager Plus Product-Related Documents To indicate a hyperlink to additional information When viewing this manual online. Click onConventions Used Highlighted text System Overview About the FrameSaver FlexSystem Overview FrameSaver Flex Feature Sets Feature Feature Set Basic Advanced Flex Flex SLV Basic Flex Features Models 9123-A1-211 9123-A1-213 Feature 9123-A1-221 9123-A1-223Maximum Number of PVCs and Management PVCs Supported Through Connections PVCs Dedicated Management PVCs July Advanced Flex SLV Features OpenLane SLM System NetScout Manager Plus and NetScout Probes About the FrameSaver Flex User Interface Basic Operation Procedure Logging On If your login was Then Select Main MenuMain Menu Screen Work Areas Service Level Verification System OptionsScreen Format Description Keyboard Keys Navigating the ScreensPress Function Keys Select For the screen Press Enter to Function Switching Between Screen Areas Selecting from a Menu Entering Information Selecting a FieldExample User Interface and Basic Operation Configuration Configuration Configuration Menu Basic ConfigurationConfiguration EDIT/DISPLAY Configuration Option Areas Configuration Option Area Description Accessing and Displaying Configuration Options Main Menu → Configuration Changing Configuration Options Configuration → PVC Connections Saving Configuration Options Main Menu → Easy Install Using the Easy Install FeatureEasy Install Screen Example If the selection is Unit is configured to operate Default Configuration → Data Ports → Dlci Records Setting Up So the Router Can Receive RIPEntering System Information Setting the System Clock Main Menu → Control → System Information Auto-Configuration Screen Example Setting Up Auto-ConfigurationMain Menu → Auto-Configuration AUTO-CONFIGURATION Main Menu → Auto-Configuration → Frame Relay Discovery Mode Selecting a Frame Relay Discovery ModeDiscovery Mode Configuration Description 9123-A2-GB20-10 July Automatically Removing a Circuit Changing Operating Mode Setting Up Back-to-Back OperationMain Menu → Control → Change Operating Mode Configuration Option Tables Configuring the Overall System System Frame Relay and LMI Options 1 Configuring Frame Relay and LMI for the SystemMain Menu → Configuration → System → Frame Relay and LMI LMI Behavior System Frame Relay and LMI Options 2 LMI Status Enquiry N1 Possible Settings 1, 2, 3, 4Traffic Policing LMI Heartbeat T1 Possible Settings 5, 10, 15, 20, 25 System Frame Relay and LMI Options 3 Configuring Service Level Verification Options Service Level Verification Options 1 SLV Timeout Clearing Event Threshold Service Level Verification Options 2SLV Packet Size bytes Main Menu → Configuration → System→ General Configuring General System OptionsGeneral System Options Main Menu → Configuration → Network → Physical Configuring the Physical InterfacesConfiguring the Network Interface Network Physical Interface Options 1 Transmit Timing Network Physical Interface Options 2Bit Stuffing Network Initiated LLB Network Initiated PLB Network Initiated Dclb Possible Settings Disable, V.54&ANSINetwork Physical Interface Options 3 Ansi Performance Report Messages Network Physical Interface Options 4 Circuit Identifier Data Port Physical Interface Options 1 Configuring the User Data PortMain Menu → Configuration → Data Ports → Physical Transmit Clock Source Monitor RTS Control Data Port Physical Interface Options 2Port DTE Initiated Loopbacks Assigning Time Slots/Cross Connections Main Menu → Easy Install → Time Slot Assignment ScreenAssigning Frame Relay Time Slots to the Network Interface Time Slot Assignment Rule Frame Relay Network Time Slot Assignment Screen ExampleValue Meaning Frame Relay Network 1 Assignment Select Frame Relay Network Assignments Synchronous Data Port Assignment Screen Example Assigning the Synchronous Data Port to Network Time SlotsSync Data Port Assignment Clearing Assignments Configuring Frame Relay for an Interface Interface Frame Relay Options 1 Interface Frame Relay Options 2 LMI Parameters Interface Frame Relay Options 3 Frame Relay DS0s Base Rate Dlci Type Possible Settings Standard, Multiplexed Manually Configuring Dlci RecordsMain Menu→ Configuration→ Network/Data Port→ Dlci Records Dlci Record Options 1 Committed Burst Size Bc Bits Dlci Record Options 2CIR bps Excess Burst Size Bits Dlci Priority Dlci Record Options 3Outbound Management Priority Main Menu → Configuration → PVC Connections Configuring PVC ConnectionsPVC Connection Options 1 Destination Dlci PVC Connection Options 2Destination Link Destination Edlci Setting Up Management and Communication Options Configuring Node IP Information Node IP Options 1 TS Access Management Link Node IP Options 2 TS Access Node IP Options 3 10. Management PVC Options 1 Configuring Management PVCsName 10. Management PVC Options 2 Primary Link Possible Settings Net1-FR1, Port-1, ClearSet DE Primary Dlci 10. Management PVC Options 3Primary Edlci 11. General Snmp Management Options 1 Configuring General Snmp ManagementName 1 Access Snmp Management 11. General Snmp Management Options 2 Configuring Telnet and/or FTP Session Support12. Telnet and FTP Session Options 1 Inactivity Timeout 12. Telnet and FTP Session Options 2 Disconnect Time Minutes FTP Login Required12. Telnet and FTP Session Options 3 FTP Session 13. Snmp NMS Security Options Configuring Snmp NMS SecurityAccess Type NMS IP Validation Snmp Traps Configuring Snmp Traps14. Snmp Traps Options 1 Number of Trap Managers 14. Snmp Traps Options 2 Enterprise Specific Traps 14. Snmp Traps Options 3 Link Traps Possible Settings Disable, Up, Down, BothRmon Traps 15. Ethernet Port Options 1 Configuring the Ethernet PortInterface Status 15. Ethernet Port Options 2 Proxy ARP Port Use Configuring the Communication Port16. Communication Port Options 1 Character Length Stop Bits Login Required16. Communication Port Options 2 Ignore Control Leads 16. Communication Port Options 3 16. Communication Port Options 4 RIP Dial-In Access Configuring the COM Port to Support an External ModemExternal Modem Commands 17. External Modem COM Port Options Configuration Security and Logins Limiting Access Controlling Asynchronous Terminal Access Set the configuration option Controlling External COM Port Device Access Controlling Telnet or FTP Access Limiting Telnet Access Limiting FTP Access Limiting Telnet or FTP Access Over the TS Management Link Controlling Snmp Access Disabling Snmp Access Assigning Snmp Community Names and Access Levels Limiting Snmp Access Through IP Addresses Main Menu → Control → Administer Logins Creating a LoginField Enter Modifying a Login Deleting a Login Operation and Maintenance Main Menu → Status → Identity Displaying System InformationView this field To find Main Menu → Status → Display LEDs and Control Leads Viewing LEDs and Control LeadsDisplay LEDs & Control Leads Screen LED Descriptions General Status LEDs 1 Label Indication Color What It Means General Status LEDs 2 Label Indication Color What It Means Network Interface LEDs Label Indication Color What It Means Additional Control Leads Label Indication What It Means Control Lead DescriptionsUser Data Port LED Label Indication Color What It Means Network Interface Device Messages Device Messages 1 What It Indicates What To Do Device Messages 2 What It Indicates What To Do See Changing Software Device Messages 3 What It Indicates What To Do Device Messages 4 What It Indicates What To Do Software Device Messages 5 What It Indicates What To Do Changes? prompt Status Menu Status InformationStatus System and Test Status Messages Self-Test Results Messages Last System Reset Date and TimeLast System Reset Date and Time Self-Test Results Messages Health and Status Messages Health and Status Messages 1 What It Indicates Health and Status Messages 2 What It Indicates Frame relay link Health and Status Messages 3 What It Indicates Frame relay link 1, 2 Test Status Messages Test Status Messages 1 What It Indicates Main Menu → Status → LMI Reported DLCIs Network LMI-Reported DLCIs StatusTest Status Messages 2 What It Indicates LMI-Reported DLCIs Status Screen Example Network LMI-Reported DLCIs Status Field What It Indicates PVC Connection Status Screen Example PVC Connection StatusMain Menu → Status → PVC Connection Status 10. PVC Connection Status 1 Field 10. PVC Connection Status 2 Field What It Indicates Main Menu → Status → Timeslot Assignment Status → Network Time Slot Assignment StatusDisplaying Network Time Slot Assignments Network Timeslot Assignment Status Screen Example Cross Connect Status Field Indicates Bottom IP Routing Table Screen Example IP Routing TableMain Menu → Status → IP Routing Table 11. IP Routing Table Values 1 Column What It Indicates 11. IP Routing Table Values 2 Column What It Indicates Performance Statistics Menu Performance StatisticsMain Menu → Status → Performance Statistics Performance Statistics Performance Statistics → Frame Relay Clearing Performance StatisticsPerformance Statistics → Clear All Statistics Performance Statistics → ESF Line Service Level Verification Performance Statistics Average round trip latency is measured every SLV sampling Main Menu → Status → Performance Statistics → Dlci Dlci Performance Statistics13. Dlci Performance Statistics 1 What It Indicates 13. Dlci Performance Statistics 2 What It Indicates CIR&EIR Main Menu → Status → Performance Statistics → Frame Relay Frame Relay ErrorsFrame Relay Performance Statistics 14. Frame Relay Performance Statistics 1 What It Indicates 14. Frame Relay Performance Statistics 2 What It Indicates Frame Relay Errors contdFrame Relay LMI Frame Relay Hdlc Errors 14. Frame Relay Performance Statistics 3 What It Indicates Main Menu → Status → Performance Statistics → ESF Line ESF Line Performance StatisticsTo select intervals You must enter an interval or time on ESF Line Performance Statistics Screen Example ±LOFC±± Statistic What It Indicates UAS Ethernet Performance Statistics Main Menu → Status → Performance Statistics → Ethernet Trap Event Log Screen Example Trap Event LogMain Menu → Status → Trap Event Log Trap Event LOG FTP File Transfers Command Definition Dir directory Upgrading System Software If the message displayed is Then Determining Whether a Download Is Completed Changing Software Transferring Collected Data If retrieving Then Troubleshooting Problem Indicators Indicators See Resetting the Unit from the Control Menu Resetting the Unit and Restoring CommunicationResetting the Unit By Cycling the Power Restoring Communication with a Misconfigured Unit If selecting Following occurs LMI Packet Capture Utility Feature Troubleshooting Management Link FeatureMain Menu → Control → LMI Packet Capture Utility LMI Trace Log Example LMI Packet Capture Utility → Display LMI Trace LogLMI Trace LOG Alarms Alarm Conditions 1 What It Indicates What To Do Alarm Conditions 2 What It Indicates What To Do Operational appears Alarm Conditions 3 What It Indicates What To Do Alarm Conditions 4 What It Indicates What To Do Device Problems 1 Symptom Possible Cause Solutions Troubleshooting TablesDevice Problems Viewing the Trap Event Log Device Problems 2 Symptom Possible Cause Solutions With a Misconfigured Unit Frame Relay PVC Problems Frame Relay PVC Problems Symptom Possible Cause Solutions Test Menu Example Tests AvailableTest When the status of a test is Only command available is Test Timeout FeatureStarting and Stopping a Test Aborting All Tests PVC Tests Screen Example PVC TestsNetwork PVC Tests Main Menu → Test → Network PVC Tests PVC LoopbackSend Pattern Main Menu → Test → Data Port PVC Tests Monitor Pattern Connectivity Physical Tests Physical Tests Screen Example Line Loopback Main Menu → Test → Network Physical Tests Payload Loopback Repeater Loopback Send Line Loopback Data Channel Loopbacks on a Frame Relay Link Send and Monitor Pattern Tests Qrss DTE Loopback Main Menu → Test → Data Port Physical Tests IP Ping Test Main Menu → Test → IP Ping Procedure Lamp Test Main Menu → Test → Lamp Test OpenLane Support of FrameSaver Devices OpenLane Support of FrameSaver Devices Setting Up the OpenLane SLM System Setting Up FrameSaver Flex and SLV Support Ordering Flex SLV Activations To Find Your License Key Number Activation Certificate Administering and Managing Flex SLV Activations Entering an Activation Certificate Checking Activation Certificate Status Scheduling Activations Accessing and Printing the Certificate Summary Report Cancelling Scheduled ActivationsChecking the Status of Scheduled Activations July Setting Up NetScout Manager Plus for FrameSaver Devices Properties AlarmsPreparation User history Configuring NetScout Manager Plus Procedure Adding SLV Alarms Using a Template Editing Alarms 9123-A2-GB20-10 July Adding SLV Alarms Manually Field Select or Enter Paradyne Creating History Files Procedure Installing the User-Defined History Files Dvuhist -f Dallas51 3 config 30 60 Dallas51k.udh Monitoring a DLCIs History Data July 9123-A2-GB20-10 July Monitoring the Agent Using NetScout Manager Plus Procedure Setting Up NetScout Manager Plus for FrameSaver Devices Setting Up Network Health for FrameSaver Devices Installation and Setup of Network Health Discovering FrameSaver Elements Configuring the Discovered Elements Grouping Elements for Reports Generating Reports for a Group About Service Level ReportsAbout At-a-Glance Reports About Trend Reports Reports Applicable to Flex and SLV DevicesPrinted Reports July 9123-A2-GB20-10 July Setting Up Network Health for FrameSaver Devices Menu Hierarchy Menus Menu Hierarchy Frame Relay Mode Status Auto-Configuration Easy Install Menu Hierarchy Leased Line Mode Data Ports Assignment Control Menu Hierarchy Snmp MIBs and Traps, Rmon Alarm Defaults MIB Support Downloading MIBs and Snmp Traps FrameSaver Units sysDescr system System Group mib-2FrameSaver Units sysObjectID system Physical Layer Interfaces Group mib-2Paradyne Indexes to the Interface Table ifTable Frame Relay Logical Layer Rmon Logical Layer NetScout Indexes to the Interface Table ifTableFor the DTE Standards Compliance for Snmp Traps Examples Table B-3. warmStart Trap What It Indicates Possible Cause Trap authenticationFailureTrap warmStart Variable-Binding Traps linkUp and linkDown Physical Sublayer MIB Physical Sublayer contd Logical Link Sublayer Traps enterprise-Specific DevHealthAndStatus SLVs devFrExt.mib Placeholder Traps RMON-Specific EventIndex EventDescription EventType EventCommunity Rmon Alarm and Event DefaultsEvent Defaults Rising Event Operation Physical Interface Alarm Defaults Frame Relay Link Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Dlci Alarm Defaults ± Paradyne Area Dlci Alarm Defaults ± NetScout Area Rx Dlci Link Object ID Cross-References Numeric Order 6.1.2.1.2.10.32.2.1 6.1.2.1.2.2.16.1.4.1.1795.2.24.2 6.1.4.1.1795.2.24.2.6.9.4 Dlci CIR Dlci EIR 6.1.4.1.1795.2.24.2.6.9.4.4.2 6.1.4.1.1795.2.24.2.6.9.4.5.2.1 6.1.4.1.1795.2.24.2.6.9.4.7.1 6.1.4.1.1795.2.24.2.6.9.4.10.3.1 6.1.2.1.10.32.2.1 Snmp MIBs and Traps, and Rmon Alarm Defaults Snmp MIBs and Traps, and Rmon Alarm Defaults Connectors, Cables, Pin Assignments Rear Panel T1 Network Interface T1 Network Cable Feature No -F1-500Canadian T1 Line Interface Cable Feature No -F1-510 Function Circuit Direction Pin Number COM Port Connector Signal Direction Pin # Standard EIA-232-D Crossover Cable Pin AT Command String To configure the modem to Standard V.35 Straight-through Cable Data Port ConnectorSignal Direction Pin Socket Ethernet Port Connector Connectors, Cables, and Pin Assignments Technical Specifications Ethernet Port COM PortT1 Network Interface Data Port Equipment List Description Model / Feature NumberFrameSaver Flex SLV Upgrade Equipment Cables Description Part Number Feature NumberOptional Features NMS Products Index Numbers IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8 IN-9 IN-10