Paradyne 9123 Restoring Communication with a Misconfigured Unit, If selecting Following occurs

Troubleshooting

Restoring Communication with a Misconfigured Unit

Misconfiguring the unit could render the menu-driven user interface inaccessible. If this occurs, connectivity to the unit can be restored via a directly connected asynchronous terminal.

"Procedure

To reset COM port settings:

1.Configure the asynchronous terminal to operate at 19.2 kbps, using character length of 8 bits, with one stop-bit, and no parity. In addition, set Flow Control to None.

2.Reset the unit, then hold the Enter key down until the System Paused screen appears. (See Resetting the Unit and Restoring Communication for other methods of resetting the unit.)

3.Tab to the desired prompt, and type y ( Yes) at one of the prompts.

If selecting . . .	The following occurs . . .
Reset COM Port usage	H Port Use is set to Terminal so the
	asynchronous terminal can be used.
	H Data Rate (Kbps), Character Length, Stop Bits,
	and Parity are reset to the factory defaults.
	H Unit resets itself.
Reload Factory Defaults	H All configuration and control settings are reset
	to the Default Factory Configuration,
	overwriting the current configuration.
	H Unit resets itself.
	CAUTION: This causes the current configuration
	to be destroyed and a self-test to be performed.

If no selection is made within 30 seconds, or if No (n) is entered, the unit resets itself and no configuration changes are made.

Once the unit resets itself, connectivity is restored and the Main Menu screen appears.

6-4 July 2000 9123-A2-GB20-10