Paradyne 9123 manual Scheduling Activations

Setting Up OpenLane for FrameSaver Devices and Activating SLV Capability

Scheduling Activations

You can activate one, many, or all FrameSaver devices at any time, until all the activations ordered for the certificate have been completed.

NOTE:

Once SLV capability is activated in a FrameSaver device, the unit cannot be returned to a non-SLV state.

"Procedure

To schedule device activations:

1.Open the OpenLane SLM application and provide your access level, which must be Admin, and select Firmware/Feature Maintenance from the OpenLane Administration screen.

2.In the Feature Activations area, select Schedule feature verifications/activations.

3.Follow the steps included on this screen.

ÐSelect the FrameSaver devices to be activated at this time by model, device name, or IP address, and click on the prompt below the selection table.

Entering an asterisk (*) in the Name or Device IP field will display all FrameSaver devices in your system, so you can pick and choose devices that will be activated.

ÐSelect whether to activate selected devices.

4.Select the FrameSaver devices to be activated at this time under Select devices by model, device name, or IP address, then click on the prompt below the device selection table. The table in the lower frame lists all the devices in the selected category.

Entering an asterisk (*) in the Name or Device IP field will display all FrameSaver devices in your system, so you can pick and choose devices that will be activated.

5.In the lower frame, click on the box in the Activate column to select or deselect a specific FrameSaver device for activation. Proceed through the list until you have selected all the devices to be activated at this time.

6.Proceed through the other steps included on this screen, then click on the prompt under Perform the scheduled verification/activation to verify what you scheduled. The Verify/Schedule Feature Activations screen appears so you can verify the scheduling information.

ÐIf the information is correct, click on Apply.

ÐIf not, or if you want to verify or change the devices that will be activated or the time the activations are to occur, click on the prompt to return to the previous screen and reselect you options.

7-8 July 2000 9123-A2-GB20-10