Paradyne 9123 manual Health and Status Messages 3 What It Indicates, Frame relay link 1, 2

Operation and Maintenance

Table 5-7. Health and Status Messages (3 of 3)

Message

What It Indicates

Primary Clock Failed		A failure of the primary clock source configured for
		the unit is detected and the unit's internal clock is
		providing the timing.
		This condition clears when the configured primary
		clock is restored.
SLV Timeout, DLCI nnnn,		An excessive number of SLV communication
frame relay link 1, 2, 3		responses from the remote FrameSaver SLV unit
		have been missed on the specified multiplexed
		DLCI; the DLCI is not suitable for user data.
		When a hardware bypass capable device has
		been detected at the other end of the PVC and this
		condition occurs, only user data for EDLCI 0 will be
		transmitted while this condition exists.
Two Level-1 Users Accessing		Two Level 1 users are already using the menu-
Device		driven user interface; only two sessions can be
		active at one time.
Time Slot Discovery in Progress,		Time slot discovery is currently taking place to
Network 1		determine the time slots that will be used for frame
		relay traffic on the network interface.
		This message only appears when the Time Slot
		Discovery option is enabled (Main Menu →
		Configuration → Time Slot Assignment → Frame
		Relay Network Assignments) and an LMI failure is
		detected on the network interface's frame relay
		link.
Yellow at Network 1		A yellow alarm signal is received on the network
		interface. Possible reasons include:
		H Network cable problem.
		H T1 facility problem.
1	nnnn indicates a DLCI number of 16 through 1007.
2	frame relay link is one of the following:
	± Net1-FR1. The frame relay link specified for the network interface, Network 1.
	± Port-1. The frame relay link associated with the user data port.
3	Does not apply to a TS Management Link DLCI.

5-16 July 2000 9123-A2-GB20-10