Paradyne 9123 manual PVC Connection Status 2 Field What It Indicates

Operation and Maintenance

Table 5-10. PVC Connection Status (2 of 2)

Field	Status	What It Indicates
EDLCI	0 to 62	For multiplexed DLCIs only.
		Identifies an individual link/
		connection embedded within a
		DLCI.
Status		Identifies whether the physical
		interfaces, LMIs, and DLCIs are all
		enabled and active for this PVC
		connection.
	Active 1	H The PVC is currently active.
	Inactive	H The PVC is inactive because:
		± Alarm conditions and network
		and SLV communication
		status indicate that data
		cannot be successfully
		passed.
		± The unit has disabled the
		interface or frame relay link
		due to internal operating
		conventions.
		± Activation of an alternate
		virtual circuit is not warranted;
		that is, no alarm condition on
		the primary destination link
		has been detected.
	Disabled	H The PVC cannot be activated
		and is essentially disabled as a
		result of how the unit was
		configured. Possible causes:
		± The physical interface at one
		or both ends of the PVC is/are
		disabled.
		± The frame relay link on one or
		both ends of the PVC is/are
		disabled.
	Invalid	H Some portion of the PVC
		connection is not fully configured.

1For the circuit to be active, both Source and Destination Statuses must be Active.

9123-A2-GB20-10 July 2000 5-21