Paradyne 9123 manual Health and Status Messages 2 What It Indicates, Frame relay link

Operation and Maintenance

Table 5-7. Health and Status Messages (2 of 3)

Message	What It Indicates
Ethernet Link Down	The Ethernet port is enabled, but communication
	between the management system and the unit is
	not currently possible on the port.
Lease Line Mode Active	The FrameSaver unit is configured for leased line
	operation (see Service Type on the Easy Install
	screen).
Link Down Administratively,	The specified frame relay link has been disabled
frame relay link 2	by the unit due to LMI Behavior conditions or LMI
	Protocol on another link is in a failed state.
	This is not an alarm condition so System
	Operational appears, as well.
LMI Discovery in Progress,	Local Management Interface protocol discovery is
frame relay link 2	in progress to determine which protocol will be
	used on the specified frame relay link.
LMI Down, frame relay link 2	The Local Management Interface(s) has been
	declared down for the specified frame relay link.
LOS at Network 1	A Loss of Signal (LOS) condition is detected on the
	network interface. Clears when the ratio of ones to
	zeros received is greater than or equal to 12.5%.
	Possible reasons include:
	H Network cable problem.
	H No signal is being transmitted at the far-end
	FrameSaver unit.
	H T1 facility problem.
Network Com Link Down	The communication link for the COM port is down,
	and the COM port is configured for Net Link.
OOF at Network 1	An Out of Frame (OOF) condition is detected on
	the network interface. Possible reasons include:
	H Incompatible framing format between the
	network and the FrameSaver unit.
	H Network cabling problem.
	H T1 facility problem.

2 frame relay link is one of the following:

± Net1-FR1. The frame relay link specified for the network interface, Network 1.

± Port-1. The frame relay link associated with the user data port.

9123-A2-GB20-10 July 2000 5-15