5. Close the printer’s cover.
6. Press Feed/Cut to position the supply under the printhead.
Using the Optional Tear Bar
Note the following change to loading labels if you have purchased
the optional tear bar. Tear labels against the tear bar. You cannot
tear tags with the tear bar.
Slide the supply between the tear bar and peel bar. It may be
easier if you cut one corner of the supply first.
Do not tear both label and backing paper at the same time.
NTear labels against the tear bar.
NTear backing paper against the tear edge.
Backing Paper
Tear Edge
Tear Bar
Peel Bar
2-8 Loading Supplies