2. Press Enter/Pause. The current setting is displayed, for
example:
PARIT Y
None r
3. Press l or r to display the parity you need, then press
Enter/Pause. Press Escape/Clear until you see the Main
Menu.
Flow Control
To change the setting, from the Main Menu select Setup, Port
Settings, then Serial Comm. Then, follow these steps.
1. Press l or r until you see
SERIAL COMM
lFlow Control r
2. Press Enter/Pause. The current setting is displayed, for
example:
FLOW CONTROL
lDTR r
3. Press l or r to display the flow control you need, then
press Enter/Pause. Press Escape/Clear until you see the
Main Menu.
XON is 17; XOFF is 19. Set flow control to DTR for PC
computers (unless you have XON/XOFF software).
5-4 Communication Values