Verif ier
The verifier scans and checks the quality of bar codes as they are
printed. The optional verifier must be purchased separately. The
verifier scans parallel bar codes; it can not scan serial bar codes.
The verifier must be enabled and set up before you can scan
bar codes. For additional set up procedures, refer to your
verifier’s Operating Instructions for more information.
To enable the verifier, from the Main Menu, select Setup, then
Verifier. Then follow these steps.
1. Press l or r until you see
VERIFIER
lState
2. Press Enter/Pause. The current setting is displayed, for
example:
VERIFIER
Disabled r
3. Press l or r to see the other option. After you display the
option you want, press Enter/Pause. Press Escape/Clear
until you see the Main Menu.
4-18 Setting Supply Options