Paxar 9855 manual Die Cut Sensor Supply Sensor

7.Rub the cotton swab across the supply sensor and die cut sensor and remove any build-up.

Die Cut Sensor

Supply Sensor

8.Clean the build-up in the supply path.

9.Let the printer dry before you reload supplies.

10.Close the exit cover by pushing firmly on it. Both latches will click into place.

11.Close the cover and printhead assembly.

12.Turn on the printer.

13.Press Feed/Cut to position the supply under the printhead. Resend your format, batch, and check digit packets.

9-4Care and Maintenance