The high energy setting is lost when you turn
off the printer.
High Energy Ribbon Limitations
When using the high energy ribbon option:
NUse a print speed of 2.5IPS (inches per second).
NPrinthead warranty is reduced to 100,000 inches.
NSerial bar codes cannot be printed.
NDo not use peel mode.
NNo more than 20% of the supply should have print (black
coverage).
CAUTION
The high energy ribbon may break or stick to the
supply when more than 20% of the supply
contains print.
NOnly white high energy supply should be used for bar code
printing.
NReverse fonts cannot be used.
NA non-printing area of at least .1 inch (2.54 mm) must exist on
the left and right edge of the ribbon.
NDo not print horizontal lines or bars.
NGraphics are limited.
Loading Ribbon 3-5