S p e c i a l P r i n t i n g C o n s i d e r a t i o n s
Keep in mind the following special printing considerations.
Maximum | Printing Method | Printhead | Knife | Peel Mode |
Print Speed |
| Density |
|
|
|
|
|
|
|
2.5/4.0/6.0 | Thermal Direct | 203/300 dpi | Supported | Supported |
ips (inches | Thermal Transfer | dots per inch |
|
|
per second) |
|
|
|
|
8.0 ips | Thermal Direct | 203/300 dpi | Not | Supported |
| Thermal Transfer |
| Supported |
|
10.0 ips | Thermal | 203 dpi only | Not | Not |
| Direct/Thermal |
| Supported | Supported |
| Transfer |
|
|
|
12.0* ips | Thermal | 203 dpi only | Not | Not |
| Direct/Thermal |
| Supported | Supported |
| Transfer |
|
|
|
*12.0 ips is the high speed option, which must be purchased separately.
The minimum label feed length is 0.75 inches (19 mm) using 8.0 ips or higher.
94x5 emulation is not supported using 300 dpi.
The maximum supply and image length with the optional 300 dpi printhead is 12.0 inches (305 mm).
You may need to clean the printhead and platen roller more frequently when printing at high speeds. See Chapter 9, "Care and Maintenance," for more information.
