SETTING SUPPLY OPTIONS 4

This chapter explains how to select the supply type, ribbon, speed,

feed mode, backfeed, print position, supply position, ma rgin

position, cut position, dispense position, backfeed distance,

separators, and skip index mode. This chapter also explains how

to adjust the print contrast and enable the verifier.

The options are listed in the table below.

Option Choices Default
Supply Type Aperture/Die Cut/Black
Mark/Continuous
Die Cut
Ribbon No/Yes/High Energy Yes
Speed 2.5/4.0/6.0/8.0/10.0/12.0/Default Default
Feed Mode Continuous/On-Demand Continuous
Backfeed Off/On/Extended Off
Print Position -99 to 99 0
Supply Position -300 to 300 0
Margin Position -99 to 99 0
Cut Position -300 to 300 0
Dispense Position 50 to 200 65
Backfeed Distance 10 to 200 65
Separators No/Yes/Long No
Skip Index No/Yes No
Contrast -699 to 699 0
SUPPLY CONTRAST DEFAULTS PORT
SETTINGS
MAIN MENU
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH SETUP DIAG.
BATCH
ENTRY
BATCH
OPTIONS
FLASH
MEMORY
SCRIPTS
SUPPLY
TYPE RIBBON SPEED FEED
MODE BACKFEED POSITIONING SEPARATORS SKIP INDEX
VERIFIER

Setting Supply Options 4-1