![](/images/new-backgrounds/1108491/10849169x1.webp)
6.Remove the new ribbon from the package as shown. Do not wrinkle or crush the new ribbon.
7.Slide the ribbon onto the back reel as far as it will go. The ribbon roll only fits on the reel one way. Carefully unwind a few inches of ribbon from the bottom of the roll.
8.Carefully feed the ribbon under both ribbon rollers and printhead as shown.
9.Align the ribbon and make sure it is straight and centered throughout the path.
10.Tape the ribbon to the
11.Rotate the
Take-up Core
Take-up Reel
Ribbon Rollers
Loading Ribbon