B a u d R a t e
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm. If password protection in enabled, press Feed/Cut three times, then press Enter/Pause before you see the Setup Menu options. Then, follow these steps.
1.Press l or r until you see
SERIAL COMM
Baud Rate r
2.Press Enter/Pause. The current setting is displayed, for example:
BAUD RATE
l 9600 r
3.Press l or r to display the baud rate you need, then press Enter/Pause. Press Escape/Clear until you see the Main Menu.
Wo r d L e n g t h
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm. Then, follow these steps.
1.Press l or r until you see
SERIAL COMM
l Word Length r
2.Press Enter/Pause. The current setting is displayed, for example:
WORD LENGTH
l8
