
Use temporary storage for graphics that are only used once or twice. However, if you have a logo that is used on multiple formats, save the graphic in flash. Once again, try to create the smallest file size possible for your graphic.
Each line in a packet requires the same amount of memory. The smaller the format, the less memory required to save it.
S e t t i n g B a t c h O p t i o n s
You can select Batch Options to change which prompts appear during Batch Entry mode and set default values for those prompts. Customizing which prompts appear during batch entry can reduce the time it takes to enter data for a format. If the optional knife is not installed, you can prevent those prompts from appearing during batch entry mode. If you set a new default value for an option, that value is used even if the prompt is not displayed. If you do not change a default value for an option, the system default is used if the prompt is not displayed.
Setting batch options requires the optional keypad, which must be purchased separately.
Refer to your keyboard’s Operating Instructions for more information.
Setting Defaults