2. Press Enter/Pause. The current setting is displayed, for
example:
Enter knife adj
[-300/300]: +0
3. Press l or r to change the cut position. Pressing l
decreases the value (moves the cut down); r increases it
(moves the cut up).
4. Press Enter/Pause when the number you need appears.
Press Escape/Clear until you see the Main Menu.
Dispense Position
This function adjusts the stopping point of the label.
To change the setting, from the Main Menu, select Setup, Supply,
then Positioning. Follow these steps.
1. Press l or r until you see
POSITIONING
lDispense Pos r
2. Press Enter/Pause.
DISPENSE POS
[50/200]: +65
3. Press l or r to change the dispense position. Pressing l
decreases the value; r increases it.
4. Press Enter/Pause when the number you need appears.
Press Escape/Clear until you see the Main menu.
4-12 Setting Supply Options