Print Speed: | 2.5 ips (64 mm) default for all serial bar |
| codes, 4.0 ips (102 mm), 6.0 ips (152 mm) |
| default for parallel bar codes, 8.0 ips (203 |
| mm), and 10.0 ips (254 mm). 12.0 ips (305 |
| mm) printing is an option that must be |
| purchased separately. |
| See Chapter 8, "Printing" for special |
| considerations when printing at speeds |
| greater than 6.0 ips. |
Maximum Print | 4.0 inches x 16.0 inches (102 mm x 406 mm) |
Area: | with 203 dpi |
| 4.0 inches x 13.0 inches (102 mm x 330 mm) |
| with 300 dpi |
Ta g C u t D i m e n s i o n s
Use these specifications for the 926 Knife.
Widths: | 0.75 inches to 4.0 inches (19 mm to 102 mm) |
Lengths: | 1.2 inches to 16.0 inches (30 mm to 406 mm) |
| NOTE: The maximum cut tag length using |
| the stacker is 3.66 inches (93 mm). |
Thickness: | 7 mils to 10 mils |
Cut Angle: | 5 degrees (plus or minus) from 90 degrees |
| with respect to the edge. |
Batch Separator: | 3.66 inches (93 mm) |
