D o w n l o a d i n g a S c r i p t
Follow these instructions to download a script from the MS DOS prompt. Set the communication parameters using the MODE command. Then, prepare the printer to accept a script.
1.From the printer’s Script Menu, press l or r until you see
SCRIPTS |
|
Load Script | r |
2.Press Enter/Pause.
Script Load
Ready
Only one script can be loaded in the printer at
a time.
When downloading a script, if you receive an error:
Check the available flash memory. See "Checking Available Flash Memory" in Chapter 6.
Format flash memory. See "Formatting Flash Memory" in Chapter 6.
After downloading a script, if the script does not appear to be loaded, try formatting flash memory and download the script again.
Using Scripts
