B a c k f e e d D i s t a n c e
This is the amount to move the label backwards. The backfeed distance can not be greater than the dispense position. If you make the backfeed distance greater than the dispense position, the dispense position automatically changes to match the backfeed distance.
The backfeed distance should equal the dispense position. An exception is when you are tearing labels, instead of peeling. Then, the backfeed distance must be 30 dots (0.15 inches) less than the dispense position to account for improper tearing of butt cut supplies. You will have a
To change the setting, from the Main Menu, select Setup, Supply, then Positioning. Follow these steps.
1.Press l or r until you see
POSITIONING
lBackfeed Dis
2.Press Enter/Pause.
BACKFEED DIS [10/200]: +65
3.Press l or r to change the dispense position. Pressing l decreases the value; r increases it.
4.Press Enter/Pause when the number you need appears. Press Escape/Clear until you see the Main menu.
Setting Supply Options
