Audio Adjustments

Auto TA and EQ (auto-time alignment and auto- equalizing)

The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position.

The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information.

WARNING

To prevent accidents, never carry out auto TA and EQ while driving. When this function measures the car interior acoustic characteristics to create an auto-equalizer curve, a loud measurement tone (noise) may be outputted from the speakers.

CAUTION

!Carrying out auto TA and EQ under the follow- ing conditions may damage the speakers. Be sure to check the conditions thoroughly be- fore carrying out auto TA and EQ.

—When speakers are incorrectly connected. (e.g., When a rear speaker is connected to a subwoofer output.)

—When a speaker is connected to a power amp delivering output higher than the speaker’s maximum input power capabil- ity.

!If the microphone is placed in an unsuitable position the measurement tone may become loud and measurement may take a long time, resulting in a drain on battery power. Be sure to place the microphone in the specified loca- tion.

 

 

Section

 

 

15

 

 

English

Before operating the auto TA

and EQ function

 

!Carry out auto TA and EQ in as quiet a place as possible, with the car engine and air conditioning switched off. Also cut power to car phones or portable telephones in the car, or remove them from the car be- fore carrying out auto TA and EQ. Sounds other than the measurement tone (sur- rounding sounds, engine sound, tele- phones ringing etc.) may prevent correct measurement of the car interior acoustic characteristics.

!Be sure to carry out auto TA and EQ using the supplied microphone. Using another microphone may prevent measurement, or result in incorrect measurement of the car interior acoustic characteristics.

!When front speaker is not connected, auto TA and EQ cannot be carried out.

!When muting the front speaker units, auto TA and EQ cannot be carried out. (Refer to page 84.)

!When this unit is connected to a power amp with input level control, auto TA and EQ may not be possible if you lower power amp input level. Set the power amp’s input level to the standard position.

!When this unit is connected to a power amp with an LPF, turn off the LPF on the power amp before carrying out auto TA and EQ. In addition, the cut-off frequency for built-in LPF of an active subwoofer should be set to the highest frequency.

!The time alignment value calculated by auto TA and EQ may differ from the actual distance in the following circumstances. However, the distance has been calculated by computer to be the optimum delay to give accurate results for the circum- stances, so please continue to use this value.

—When the reflected sound within a vehi- cle is strong and delays occur.

En 89

Page 88 Page 90
Page 89
Image 89
Pioneer DEH-P980BT operation manual Before operating the auto TA, EQ function
Page 88 Page 90

DEH-P980BT specifications

The Pioneer DEH-P980BT is a feature-rich car stereo receiver that embodies advanced audio technology and user-friendly design. As part of Pioneer's esteemed lineup, this model is targeted towards audiophiles and casual listeners alike, offering exceptional sound quality and a myriad of customization options.

One of the standout features of the DEH-P980BT is its Bluetooth capability. This allows for seamless wireless audio streaming from a variety of devices, including smartphones and tablets. The built-in Bluetooth not only supports audio playback but also provides hands-free calling, ensuring safe communication while driving. The inclusion of dual phone connection is a notable improvement, enabling users to connect two mobile devices simultaneously.

The DEH-P980BT shines when it comes to audio quality. It features Pioneer's Advanced Sound Retriever technology, which enhances compressed audio files like MP3 and AAC, restoring lost frequencies and creating a richer auditory experience. Additionally, the unit is equipped with a 24-bit DAC that delivers high-resolution audio through its RCA output, allowing for cleaner sound in a multi-channel setup.

For users seeking to personalize their listening experience, the DEH-P980BT offers extensive customization options. The 3-way crossover and 7-band graphic equalizer enable meticulous sound tuning to match individual preferences and different audio environments. Moreover, the Auto EQ feature automatically adjusts sound settings based on cabin acoustics, providing optimal performance with minimal effort.

The display on the DEH-P980BT is another highlight, featuring a bright and clear OLED screen that is easy to read in various lighting conditions. The interface is intuitive, allowing for quick navigation through menus and settings. Users can select from a range of color options and visual effects to match their vehicle's interior, providing a personalized touch.

In terms of connectivity, the DEH-P980BT is compatible with various media formats, including CD, MP3, WMA, and JPEG files via USB. This adaptability allows users to access a wide range of audio content. Furthermore, the auxiliary input offers additional flexibility for connecting portable devices.

In summary, the Pioneer DEH-P980BT is a well-rounded car stereo receiver that emphasizes audio quality, connectivity, and user customization. With its advanced features and technologies, it stands as an exceptional choice for those looking to enhance their in-car audio experience.
Top Page Image Contents