Audio Adjustments

Front speaker left—Front speaker right—Rear speaker right—Rear speaker left—Subwoofer left—Subwoofer right

#You cannot select subwoofer left and subwoo- fer right when the subwoofer output is off.

5Push MULTI-CONTROL up or down to adjust the distance between the selected speaker and the listening position.

Each time MULTI-CONTROL is pushed up or down, the distance increases or decreases. 160.0inch to 0.0inch is displayed as the dis- tance is increased or decreased, if you have selected inches (inch).

400.00cm to 0.00cm is displayed as the dis- tance is increased or decreased, if you have

selected centimeters (cm).

# You can adjust the distance for the other speakers in the same way.

6Press BAND to cancel the time align- ment mode.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off. When a sub- woofer is connected to this unit, turn the sub- woofer output on.

The subwoofer output phase can be switched between normal and reverse.

1Use MULTI-CONTROL to select Subwoofer1.

Subwoofer1 appears in the display.

2Press MULTI-CONTROL to turn subwoo- fer output on.

ON appears in the display. Subwoofer output

is now on.

# To turn subwoofer output off, press MULTI-CONTROL again.

Section

15

3 Push MULTI-CONTROL left or right to

English

 

select stereo or monaural.

 

Push MULTI-CONTROL left to select monaural

 

and MONO appears in the display. Push

 

MULTI-CONTROL right to select stereo and

 

STEREO appears in the display.

 

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

1Use MULTI-CONTROL to select Subwoofer2.

Subwoofer2 appears in the display.

# When the subwoofer output is on, you can se- lect Subwoofer2.

2Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

50—63—80—100—125—160—200 (Hz) Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

3Push MULTI-CONTROL up or down to adjust the output level of the subwoofer. Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to –24 is displayed as the level is increased or decreased.

Adjusting low pass filter attenuation slope

When the subwoofer output is on, you can ad- just the continuity of sound between speaker units.

En 83

Page 82 Page 84
Page 83
Image 83
Pioneer DEH-P980BT Using subwoofer output, Adjusting subwoofer settings, Adjusting low pass filter attenuation slope
Page 82 Page 84

DEH-P980BT specifications

The Pioneer DEH-P980BT is a feature-rich car stereo receiver that embodies advanced audio technology and user-friendly design. As part of Pioneer's esteemed lineup, this model is targeted towards audiophiles and casual listeners alike, offering exceptional sound quality and a myriad of customization options.

One of the standout features of the DEH-P980BT is its Bluetooth capability. This allows for seamless wireless audio streaming from a variety of devices, including smartphones and tablets. The built-in Bluetooth not only supports audio playback but also provides hands-free calling, ensuring safe communication while driving. The inclusion of dual phone connection is a notable improvement, enabling users to connect two mobile devices simultaneously.

The DEH-P980BT shines when it comes to audio quality. It features Pioneer's Advanced Sound Retriever technology, which enhances compressed audio files like MP3 and AAC, restoring lost frequencies and creating a richer auditory experience. Additionally, the unit is equipped with a 24-bit DAC that delivers high-resolution audio through its RCA output, allowing for cleaner sound in a multi-channel setup.

For users seeking to personalize their listening experience, the DEH-P980BT offers extensive customization options. The 3-way crossover and 7-band graphic equalizer enable meticulous sound tuning to match individual preferences and different audio environments. Moreover, the Auto EQ feature automatically adjusts sound settings based on cabin acoustics, providing optimal performance with minimal effort.

The display on the DEH-P980BT is another highlight, featuring a bright and clear OLED screen that is easy to read in various lighting conditions. The interface is intuitive, allowing for quick navigation through menus and settings. Users can select from a range of color options and visual effects to match their vehicle's interior, providing a personalized touch.

In terms of connectivity, the DEH-P980BT is compatible with various media formats, including CD, MP3, WMA, and JPEG files via USB. This adaptability allows users to access a wide range of audio content. Furthermore, the auxiliary input offers additional flexibility for connecting portable devices.

In summary, the Pioneer DEH-P980BT is a well-rounded car stereo receiver that emphasizes audio quality, connectivity, and user customization. With its advanced features and technologies, it stands as an exceptional choice for those looking to enhance their in-car audio experience.
Top Page Image Contents