Introduction of advanced
TV tuner operation
1
1
1
1Functiondisplay
Showsthe function status.
1 PressMULTI-CONTROL to display the
mainmenu.
FUNCTION,AUDIOand ENTERTAINMENT
appearon the display.
2 UseMULTI-CONTROL to select
FUNCTION.
BSSMappears on the display.
#Toreturn to the channel display, press BAND.
Note
Ifyou do not operate the function within about 30
seconds,the display is automatically returned to
thechannel display.
Storing and recalling
broadcast stations
Youcan easily store up to 12 broadcast sta-
tionsfor later recall.
1 Whenyou find a station that you want
tostore in memory press LIST to switch to
thepreset channel list mode.
2 UseMULTI-CONTROL to store the se-
lectedstation in memory.
Turnto change the preset number; press and
holdto store.
Thepreset number you haveselected will
flashand then remain lit. The selected station
hasbeen stored in memor y.
#Ifyou do not operate the list within about 30
seconds,the preset channel list mode is can-
celedautomatically.
Notes
!Upto 24 stations, 12 for each of two TV bands,
canbe stored in memory.
!Youcan also store stations assigned to preset
tuningnumbers 1–6by pressing and holding
oneof the preset tuning buttons 1–6on the re-
motecontrol.
Storing the strongest
broadcast stations
sequentially
1 UseMULTI-CONTROL and select
FUNCTIONto display BSSM.
2 PressMULTI-CONTROL to turn BSSM
on.
Searchingis displayed. While Searching is
displayed,the 12 strongest broadcast stations
willbe stored in order fromthe lowest channel
up.When finished, the preset channel list ap-
pears.
#Tocancel the storage process, press
MULTI-CONTROL.
3 UseMULTI-CONTROL to select the de-
siredstation.
Turnto change the station; press to select.
#Youcan also change the station by pushing
MULTI-CONTROLup or down.
TV tuner
En
74
Section
13