Displaying BD address of your

cellular phone

1 UseMULTI-CONTROL to select
Deletephone in the function menu.
Deletephone appears in the display.
2 PushMULTI-CONTROL up or down to
selecta registration assignment.
Eachtime MULTI-CONTROL is pushed up or
down,the registration assignment is switched
inthe following order:
Phone1(user phone 1)—Phone2 (user phone
2)—Phone3(user phone 3)—Guest1 (guest
phone1)—Guest2 (guest phone 2)
#Ifthe assignment is empty, No data is dis-
playedand the operation is not possible.
3 PushMULTI-CONTROL left to switch to
theBD address.
12-digithexadecimal string is displayed.
#PushingMULTI-CONTROL right returns to the
devicename.
4 PressBAND to return to the standby
display.

Displaying BD address of this unit

1 UseMULTI-CONTROL to select
DeviceINFO. in the function menu.
Thedevice name (Pioneer BTunit) of this unit
appearsin the display.
2 PushMULTI-CONTROL left to switch to
theBD address.
12-digithexadecimal string is displayed.
#PushingMULTI-CONTROL right returns to the
devicename.
Note
Whenyou push MULTI-CONTROL down while
theBD address (or the device name) of this unit
isdisplayed, the system version of this unit ap-
pears.About the system version, refer to Display-
ingsystem version for repair on this page.
Displaying system versionfor repair
Shouldthis unit fails to operate properly and
youconsult with dealer for repair, you may be
askedto indicate the system versions of this
unitand of Bluetooth module. You can display
theversions and confirm them.
1 UseMULTI-CONTROL to select
DeviceINFO. in the function menu.
Thedevice name (Pioneer BTunit) of this unit
appearsin the display.
2 PushMULTI-CONTROL down to switch
tothe system version of this unit.
Thesystem (microprocessor) version of this
unitis displayed.
#PushingMULTI-CONTROL left displays the
versionof the Bluetooth module of this unit.
PushingMULTI-CONTROL right returns to the
systemversion of this unit.
Bluetooth Telephone
En 51
English
Section
07