!Connectionis normally established by HFP,
whichgives you a full control of functions
availableon the telephone source. How-
ever,in some cases when you make con-
nectionfrom your cellular phone, the
connectionmay bemade byHSP and sev-
eralfunctions may not be available.
!Aphone may be connected via Bluetooth
wirelesstechnology but not yet registered
withthis unit. In this case it is said to be
temporarilyconnected, and the available
featuresare limited. To take full advantage
ofall the features available, we recommend
youregister your phone withthis unit.
Referto Registering connected cellular
phoneon the next page for more on this.
Searchingfor available cellularphones
Youcan have this unit search for any available
phonesin the area that have Bluetooth wire-
lesstechnology, then select which you want to
connectto from a list displayed on-screen.
1 UseMULTI-CONTROL to select
Search& connect in the function menu.
Search& connect appears in the display.
2 PressMULTI-CONTROL to search for
availablecellular phones.
Whilesearching, Searching is displayed.
Whenavailable cellular phones featuring
Bluetoothwireless technology are found, de-
vicenames or Name not found (if names
cannotbe obtained) are displayed.
#Ifthis unit fails to find any availablecellular
phones,Not found is displayed.
3 PushMULTI-CONTROL up or down to
selecta device name you want to connect.
4 PressMULTI-CONTROL to connect the
selectedcellular phone.
Whileconnecting, Connecting is displayed.
Tocomplete the connection, please check the
devicename (Pioneer BTunit) and enter the
linkcode on your cellular phone. If the con-
nectionis established, Connected is dis-
played.
#Thelink code is set to 0000 as default. You
canchange this code in the initial setting. Refer
toEntering PIN code for Bluetooth wireless con-
nectionon page 96.
Using a cellular phone toinitiate a connection
Puttingthe unit in Connection open mode al-
lowsyou to establish a Bluetooth wireless con-
nectionfrom your phone. You may need to
referto the operation manual that came with
yourphone if you are unsure how to initiate a
connectionfrom your phone.
1 UseMULTI-CONTROL to select
Connectionopen in the function menu.
Connectionopen appears in the display.
2 PressMULTI-CONTROL to open the con-
nection.
Alwayswaiting is displayed and the unit is
nowon standby for connection from cellular
phone.
3 Usecellular phone to connect to this
unit.
#Operationvaries depending on the type of
yourcellular phone. Refer to the instruction man-
ualthat came with your cellular phone for de-
tailedinstructions.
#Youmay need to enter the link code on your
cellularphone to complete the connection.
Bluetooth Telephone
En 39
English
Section
07