Scanning tracks of a CD
Scanplay lets you hear the first 10 seconds of
eachtrack on the CD.
1 UseMULTI-CONTROL to select
Scanmode in the function menu.
Scanmode appears in the display.
2 PressMULTI-CONTROL to turn scan play
on.
Thefirst 10 seconds of each track is played.
3 Whenyou find the desired track press
MULTI-CONTROLto turn scan play off.
Thetrack will continue to play.
#Ifthe display has automatically returned to
theplayback display, select Scan mode again by
usingMULTI-CONTROL.
Note
Afterscanning of a CD is finished, normal play-
backof the tracks will begin again.
Pausing CD playback
Pauselets you temporarily stop playback of
theCD.
1 UseMULTI-CONTROL to select Pause in
thefunction menu.
Pauseappears in the display.
2 PressMULTI-CONTROL to turn pause
on.
Playbackof the current track pauses.
#Toturn pause off, press MULTI-CONTROL
again.
Selecting the search method
Youcan switch the search method between
fastforward/reverse and searching every10
tracks.
1 UseMULTI-CONTROL to select
Searchmode in the function menu.
Searchmode appears in the display.
2 PressMULTI-CONTROL to select the
searchmethod.
PressMULTI-CONTROL until the desired
searchmethod appears in the display.
!FF/REV–Fast forward and reverse
!Roughsearch –Searching every 10
tracks
Searching every 10 tracks inthe current disc
Ifa disc contains over 10 tracks, you can
searchevery 10 tracks. When adisc contains
manytracks, you can roughly search for the
trackyou want to play.
1 Selectthe search method Rough search.
Referto Selecting the search method on this
page.
2 Pushand hold MULTI-CONTROL left or
rightto search every 10 tracks on a disc.
#Ifa disc contains less than 10 tracks, pushing
andholding MULTI-CONTROL right recalls the
lasttrack of the disc. Also, if the remaining num-
berof tracks after searching every 10 tracks is
lessthan 10, pushing and holding
MULTI-CONTROLright recalls the last track of
thedisc.
Built-in CD Player
En
24
Section
05