Listening to the radio
4
4
4
4
3
3
3
3
5
5
5
5
2
2
2
2
1
1
1
6
6
6
Theseare the basic steps necessar y to operate
theradio. More advanced tuner operation is
explainedstarting on the next page.
1Stereo(5) indicator
Showswhen the selected frequency is
beingbroadcast in stereo.
2LOCindicator
Showswhen local seek tuning is on.
3Bandindicator
Showswhich band the radio is tuned to, AM
orFM.
4Presetnumber indicator
Showswhich preset has been selected.
5Frequencyindicator
Showsthe frequency to which the tuner is
tuned.
6Signallevel indicator
Showsthe radio wave strength.
1 PressSOURCE to select the tuner.
PressSOURCE until you see Tuner displayed.
2 PressBAND to select a band.
PressBAND until the desired band (FM-1,
FM-2,FM-3for FM or AM) is displayed.
3 Toperform manual tuning, push
MULTI-CONTROLleft or right.
Thefrequencies move up or down step by
step.
4 Toperform seek tuning, push and hold
MULTI-CONTROLleft or right for about one
secondand release.
Thetuner will scan the frequencies untila
broadcaststrong enough for good reception is
found.
#Youcan cancel seek tuning by pushing
MULTI-CONTROLleft or right.
#Ifyou push and hold MULTI-CONTROL left or
rightyou can skip stations. Seek tuning starts as
soonas you release MULTI-CONTROL.
Tuner
En 19
English
Section
04