Pitney Bowes manual Setting Up the W660/W680 Printer

2 • Setting Up the W660/W680 Printer

Setting Up the W660/W680

The assembled printer should look like the picture below. The parts you have to put together are identified.

Wireframe	Feed Ramp	Sliding
Input Stacker	and Lock Knob	Fence

Output Stacker

Refer to this picture as you set up your printer. Follow the steps on pages 2-7 through 2-15. The following product orientation will be useful in performing these steps:

Front is the area of the printer housing the LCD.

Rear is the area of the printer with the cable interface panel. Left side is the input area of the printer.

Right side is the output area of the printer.

2-4 Pitney Bowes W660/W680 Operator Guide