Pitney Bowes W680, W660 Printer Maintenance, Exit Rollers Sensor, Floor Assembly and Top Cover

Printer Maintenance • 5

Exit Rollers

Sensor

If the right and left exit rollers are misaligned, that is, contact printed surfaces, they can become contaminated with ink. Use water to dampen a soft cloth and remove the ink from the rollers.

A film and/or dust can build up on the sensors and cause misfeeds of the material. Lift the transport door and use com- pressed air to blow dust from the sensors. Cans of compressed air are available from many computer supply houses.

Sensor Location

Floor Assembly and Top Cover

Periodically wipe the cover and floor assembly (feed deck) with a soft cotton cloth, dampened with water only.

Pitney Bowes W660/W680 Operator Guide 5-3