Pitney Bowes W680, W660 manual Setting Up A Job continued, Feed Ramp and Lock Knob, Wireframe Slide

W660/W680 Basics • 3

Setting Up A Job (continued)

5. Feed Ramp and Lock Knob

The feed ramp adds a gentle slope to the stack to help feeding. Lower the feed ramp until the top of the bottom piece in the stack reaches the middle of the feed ram. Secure the feed ramp with the lock knob.

6. Wireframe Slide

Slides the wireframe side to side. Lock in position with the lock lever (Item 7).

7.Wireframe Slide Lock Lever (Not Shown)

Locks the wireframe slide in position.

4 3 2 1 13 12

5

11

10

6

7

8

8. Feed Fence

9

Helps confine the stack. Adjust to the width of your material plus 1/16" clearance.

9. Control Panel

Use the control panel buttons to access printer menus, define print options, run the print job, position the print carriage and turn the printer on and off line. See Appendix A, Printer Menus,

Pitney Bowes W660/W680 Operator Guide 3-5