Pitney Bowes Using the W660/W680 With Your Computer, Printer Maintenance, Troubleshooting

Table of Contents

Setting Up a Job	3-4
1. Set the Separator Gap	3-6
2. Center the Wireframe under the Material	3-9
3. Set the Feed Angle	3-10
4. Position the Sliding Fence	3-11
5. Load Material	3-12
6. Adjust the Position of the Feed Ramp	3-13
7. Adjust the Media Thickness Lever	3-14
8. Adjust the Exit Rollers	3-15
9. Print a Test Piece	3-16

Chapter 4, Using the W660/W680 With Your

Computer

Installing the Printer Driver	4-2
Selecting Printer Properties	4-10
Using the Printer Properties Window	4-11
Selecting the W660/W680 Printer from a Windows
Application	4-25
Envelope Designer™	4-26

Chapter 5, Printer Maintenance

Preventive Maintenance	5-2
Cleaning	5-2
Print Quality Problems	5-2
Exit Rollers	5-3
Sensor	5-3
Floor Assembly and Top Cover	5-3

Chapter 6, Troubleshooting

Problems and Solutions	6-2
Feed Problems	6-2
Print Quality Problems	6-3
Interface Problems	6-4
Connector Diagram	6-5
Motor Problems	6-6

ii Pitney Bowes W660/W680 Operator Guide