Pitney Bowes manual Adjust the Upper Exit Rollers, Output Stack Height, 3-15, W660/W680 Basics

W660/W680 Basics • 3

Setting Up A Job (continued)

8. Adjust the Upper Exit Rollers

Adjust the upper exit rollers so the outside edge of the rollers overlap the left and right edges of the material by 1/4". Slide the rollers from side to side to make the adjustment.

IMPORTANT: Make sure the rollers do not touch any printed area of the material. If this happens, the rollers will act like a printing press and imprint a faint impression at incremental distances on the material. If this happens, move the roller or rollers toward the nearest clear zone, that is, an area free of printing.

Output Stack Height

The output stacker holds up to five inches of material before it becomes necessary to remove the stack from the bin. The op- tional W760 stacker increases capacity to 300 #10 envelopes.

NOTE: As the stack approaches the 5" limit, there is a poten- tial for stacking misfeed (pieces not neatly stacked one on top of the other). This can cause envelopes to stack out of ZIP Code sequence.

Pitney Bowes W660/W680 Operator Guide 3-15