Pitney Bowes Using the W660/W680 with Your Computer, Installing the W660/W680 Printer Driver

4 • Using the W660/W680 with Your Computer

Installing the

W660/W680

Printer Driver

Before using the W660/W680 printer with your computer, you must install the W660/W680 printer driver. The driver gives your computer information about the printer you're using, and tells the printer about the settings you want to use in your print job.

To install the W660/W680 printer driver, follow these steps:

1.Turn on your computer and wait for it to finish booting.

2.Insert the Pitney Bowes Stand Alone Printing (Envelope Designer Plus) software into the CD-ROM drive. After a few seconds, the ADDRESSRIGHT Printing System Welcome message displays on the monitor. If it doesn't, do the following:

•Click the Start menu, then select the Run option.

•Click "Browse" and type D:\setup.exe ("D" equals the CD-ROM drive letter). If your CD-ROM drive is designated by a different drive letter, type the correct letter in the command line.

•Click "OK" in the Run window. The Run window closes and the ADDRESSRIGHT Printing System Welcome window appears.

3.When you are ready, click "OK" to proceed with the installation.

4-2 Pitney Bowes W660/W680 Operator Guide