Pitney Bowes W680, W660 manual Job Settings continued, Appendix A Control Panel Menus, A-19

Appendix A • Control Panel Menus

7.Job Settings (continued)

To use this option to direct the printer to Load or Save the Job Setting as a certain number:

1.Press the + or – buttons to scroll through the Main Menu options until the 7. JOB SETTINGS option appears on the LCD panel.

2.Press the Enter button to select this option.

3.Press the + or – buttons to select A. Load or B. Save.

4.Press the Enter button to select the desired option.

5.After making your selection, press the Menu button several times to back out of the Menu, until the printer displays OFF LINE. Then, press the On Line button to enable the printer.

NOTE: If your printer is attached to a computer, use this menu to configure your printer so it is compatible with your computer’s setup.

Pitney Bowes W660/W680 Operator Guide A-19