![](/images/new-backgrounds/1161929/16192945x1.webp)
ENGLISH |
|
How to Use the Battery Pack | PouÏívání baterie |
CZECH
Charging the Battery Pack | Nabíjení baterie |
1.Attach the Battery Pack to the CAM.
2.Move [POWER/MODE Selector] up to turn the CAM off.
3.Connect the AC Power Adapter with the CAM.
◆You can detach the AC adapter by pressing the buttons on the sides of
the adapter cable plug while pulling it out.
4.Insert the AC Power Adapter into the outlet.
Note
✤You can charge the Battery Pack when you use the CAM, but it takes a long time relatively.
Warning
Charging directly to the CAM
4
1
3
1.Pfiipevnûte baterii ke kamefie.
2.Pohybem ovladaãe [POWER/MODE Selector] nahoru vypnûte kameru.
3.Pfiipojte napájecí adaptér pfiímo ke kamefie.
◆Napájecí adaptér se odpojuje stisknutím tlaãítek na bocích zástrãky adaptéru a souãasn˘m tahem za nûj.
4.Zapojte napájecí adaptér do zásuvky.
Poznámka
✤Baterii mÛÏete nabíjet i za provozu kamery, ale trvá to relativnû dlouho.
Varování
✤ Pfied pouÏitím se doporuãuje baterii zcela |
✤It is recommended you fully charge the Battery Pack before use.
✤You should only charge the battery in an environment between 0°C and 40°C.
nabít. |
✤ Baterie by mûla b˘t nabíjena pouze v |
prostfiedí s teplotou od 0°C do 40°C. |
Using Hardware Reset Function
1.Remove the Battery Pack and the AC Power Adapter.
2.Press and hold the [RESET] button over one second.
Note
✤If you reset the CAM, all functions you set are initialized.
PouÏívání funkce Hardwarov˘ reset
1. Vyjmûte baterii a napájecí adaptér.
2. Stisknûte a podrÏte tlaãítko [RESET] déle neÏ vtefiinu.
Poznámka
✤ KdyÏ resetujete kameru , budou v‰echny funkce, které jste nastavili, inicializovány.
23