SATO 200i manual Character Font Capabilities, Print, Interface Modules, Media, Matrix Fonts

Unit 2: Technical Data

PRINT

Method	Direct Thermal
Speed (maximum)	4.05 Inches Per Second (103 mm/s) (varies with print duty)
Print Module (dot size)	.0049 Inches (.125 mm)
Resolution	203 Dots Per Inch (8 dpmm)
Maximum Print Width	1.89 Inches (48 mm)
Maximum Print Pitch	6.30 Inches (160 mm)
Angle	0°, 90°, 180°, 270°

INTERFACE MODULES

Serial Port

IrDA

Ethernet

Bluetooth

RS232C (9600 to 57,6000 dps) Standard

Ready/Busy or X-On/X-Off Flow Control

Bi-Directional Status

Ir. Std., BHT, Ir Comm (3-wire cooked), Ir Obex (optional)

802.11B Wireless Wi-Fi (with built-in display)

Version 1.1 Compliant

MEDIA

Media Types	Super High Sensitive, Techno-Thermal A, Sythetic Paper Thermal
	C, Non-Sticky Thermal 64, Two-Color Thermal
Linerless Media	Standard (strong/weak adhesive)
Media Thickness	0.0025 to 0.0075 Inches (0.064 - 0.190 mm)
Roll Media Outside Diameter	2.64 Inches (67 mm +/- 0.5) MB200i only
Wound	Face In / Face Out. Face In is for linerless only.
Core Size	0.75 to 1.0 Inches ( 19.05-25.40 mm) internal diameter

CHARACTER FONT CAPABILITIES

MATRIX FONTS

XU Font	5 dots W x 9 dots H (Helvetica)
XS Font	17 dots W x 17 dots H (Univers Condensed Bold)
XM Font	24 dots W x 24 dots H (Univers Condensed Bold)
OA Font (OCR-A)
OB Font (OCR-B)
AUTO SMOOTHING FONTS
WB	18 dots W x 30 dots H
WL	28 dots W x 52 dots H
XB	48 dots W x 48 dots H (Univers Condensed Bold)
XL	48 dots W x 48 dots H (Sans Serif)

SATO MB2i Service Manual PN 9001145B Page 2-3