SATO 200i manual CRC Cyclic Redundancy Check Mode, CRC Check Mode

Unit 5: Printer Configuration

CRC (CYCLIC REDUNDANCY CHECK) MODE

Allows the operator to enable or disable the Cyclic Redundancy Check (CRC) for each received print data when using wireless LAN or Bluetooth interface.

Refer to Figure 1-1 of the Introduction unit in this manual for dipswitch location.

Choose Applicable Option

Enable CRC Check: (DSW = 1: OFF, 2: ON, 3: ON, 4: ON) + Cover Open + PRINT + POWER

Disable CRC Check: (DSW = 1: OFF, 2: ON, 3: ON, 4: ON) + Cover Open + FEED + POWER

Flashes green when saving the Head Check setting.

Flashes green when setting

completed.

Confirm setting is

complete.

Press POWER.

Printer shuts down.

Figure 5-7, CRC Check Mode

SATO MB2i Service Manual PN 9001145B Page 5-12